chappy Posted October 31, 2007 Share Posted October 31, 2007 I'm hooking up some fogs and wasn't sure where the best place to tap into the high beams was. Pre harness right after the head lamp or further away from the head light? It looks like the used hockey tape to insulate the wires before they enter the harness Thanks guys. Link to comment Share on other sites More sharing options...
OzMattie Posted November 1, 2007 Share Posted November 1, 2007 Hi, My pathy used to have fog lights on it. Where they had been spliced into the original loom managed to short out and cause a fire under the hood. I ended up Buying a Piranha Off Road super loom which has a trigger wire for driving lights. If you could find a Male H4 connector (the same as the back of a headlight globe) I could give you the measurements to make your own. It plugs into the orginal headlight socket and wires to the battery. This loom made my headlights alot brighter than the original. P.S. If you find somewhere the sells the male H4 connectors can you let me know. Thanks. Link to comment Share on other sites More sharing options...
chappy Posted November 1, 2007 Author Share Posted November 1, 2007 I want put the switch in one the empty slots next to the dimmer but I cant find a route through the fire wall. Do you know an easy path or should I just use the door jam? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now