barthel Posted June 12, 2007 Share Posted June 12, 2007 Does anyone here have any experience with BP skids, fitting a set for a 90-95 on an '88? Curious if it would work. Thanks in advance. Link to comment Share on other sites More sharing options...
Simon Posted June 12, 2007 Share Posted June 12, 2007 Should work. I believe the crossmembers remained in the same place. I think Marcel only stated 90-95 as he didn't have a 2-door to personally test on. I know the front will fit, as the stock skid was the same. Maybe Slick, or Unccpathfinder can get under their 2 and 4 doors and take some measurements to see if the crossmembers are in the same place. I'm willing to bet that they are. Link to comment Share on other sites More sharing options...
Slick Posted June 12, 2007 Share Posted June 12, 2007 as simon said, the front skids are the same on both trucks. i will see if dave is willing to crawl under king & piglet today to look around and see about the rest. Link to comment Share on other sites More sharing options...
k9sar Posted June 12, 2007 Share Posted June 12, 2007 I had to slightly modify (bend) mine to fit. There is an indent in the crossmember and the bolt holes that the skids fit into are angled. I took a sledge to the skids and put a nice arc in the end and it fit fine. Oh, it was a PITA to bend them. These things are strong. http://www.cardomain.com/ride/684669/6 Link to comment Share on other sites More sharing options...
89_trailboss Posted June 13, 2007 Share Posted June 13, 2007 2 and 4 doors are identical underneith. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now