Due to a hardware failure on the hosts systems, all posts and messages created between May 26th and Jan 13th have been lost. Additionally, if you joined the NPORA Forums community during that time, you'll need to re-register. -NPORA Mod Team *Updated: 05/19/2022 12:15AM PST
Search the Community
Showing results for tags 'brake rotors'.
What's good NPORA friends? Aside from A LOT else that happened last year, I was in a fender bender (not my fault) which resulted in my Pathfinder being deemed a "Salvage" vehicle status. All headaches aside, the DMV requires a Brake & Lamp CERTIFIED ($$$) INSPECTION ($$$). According to the certified shop this means NO cracks (even hairline and airtight) in the light lenses and all lights functional as should be. ANY CRACK in a lense will fail the inspection. All my lights function and the bulbs are the correct original colors yet I have purchased all new lenses now because they all had fine cracking after almost 30 years on the roads. So that takes care of the Lamp Part, then ....there is the Brake inspection. No, it's not just do the brakes work, function, and stop the vehicle but the tolerances MUST be within specifications of the pads and rotors. My model pathfinder has front and rear disk and rotor brakes. I figure Okay, let's get ALL the brakes in order to make the best of the needed work. I'll get new rotors and pads front and back since I haven't done any brake work/maintenance since I bought the Nissan & they are in need of the work ...and I can hear GRINDING now. My local shop said the FRONT ROTORS on my Nissan ARE VERY DIFFICULT and require about $350 in labor!? Apparently this has to do with the 4X4 front end? What's the deal, how hard is the Front ROTOR and pad replacing? How hard are the rear Rotors and pads replacing? How difficult is proper bleeding of all four corners? I'm one guy in my small driveway and the HOA (home owners association) doesn't allow much time for vehicle work in the driveway... Should I do the rears myself because they are actually rather SIMPLE and ask the shop to do the fronts. The shop is saying the front brakes (pads and rotors and labor) is $400 and the rear is $250 more (parts and labor total job $650). Or should I do the job myself? What are your seasoned opinions, advice? Thanks again for any help. Aaron https://imgur.com/gallery/xofME4v<blockquote class="imgur-embed-pub" lang="en" data-id="a/xofME4v" ><a href="//imgur.com/a/xofME4v">Pre Brake & Lamp Inspection WD21 Nissan</a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>