Jump to content

dagwoodzz

Members
  • Posts

    2,425
  • Joined

  • Last visited

Posts posted by dagwoodzz

  1. When I was in school Dokken was one of my favorites. They were on the threshold of being a big hair band, but never quite made the cut. The did do a soundtrack for one of the Nightmare on Elmstreet movies.

  2. GUYS!

     

    Unichip is probably reading this thread daily. The thread is titled I don't see the real results here...

     

    It is of the opinion of most folks on this board that the product does not actually improve performance. The results have not been documented in a format that cuts the mustard for most members.

     

    Perhaps they will rework it and shock us all by proving that their product will increase performance for Pathfinders.

     

    If you guys are clowning around off-topic it makes NPORA and their members look bad. Start you own thread! They don't cost any money!

  3. Hmmmm seems to be held on by a single a/c pipe running from the lines into the condensor running underneath the condensor for support. Sooooo anyone in NZ able to hook me up? :)

     

    As far as being easy to pull, I already had the dash out of my parts car so it was quite simple. You probably want to avoid pulling the dash.

     

     

    Sorry man sold mine to a cannuck. :hide:

     

    :hides from Pezzy:

  4. anyone know anything about freon? Is it very harmless to breathe or anything because the inside of my truck has an odor of A/C Gas, Also new zealand laws state

     

    Just keep it ventilated the next few days with the windows cracked at night. You'll be fine. Remember some huffers breathe straight freon trying to get high. Somehow they live, but never get smart! :aok:

  5. His shaft was screwed, you could hold one end and turn the other. Swapped it with the parts car and it's running now. Just when the timing sounds right, when you tighten it down it gets off. Bobby's going to get a timing light tomorrow and nail it down. Thanks for all your help guys, that was the hardest tune up I've ever seen. At least he didn't have to buy a distributor.

×
×
  • Create New...