Jump to content

Ammos

Members
  • Posts

    6
  • Joined

  • Last visited

Posts posted by Ammos

  1. So I did quite a bit of work on pathy vavle cover gaskets starter alternater spark plugs fuel filter swirl vavle brakes oil prusure switch rad ball joints picked up some off set rims tonight with 3.5 inches of back spacing I will be taken pictures as the pathy off road build goes along she s been pretty good so far fingers crossed 

    • Like 2
  2. So what I am fighting with pathy today I am doing the ball joints due to the fact on the last oil change it had some play now it was rattling around for a week now I am putting on some  three 555 ball joints so I got the 3 bolts out and the castle nut but I was wondering is it tapered ?I know you can't get a hammer and beat on the lower control arm 

  3. I am looking in to getting a lift for my pathy but only lift I can find are the level pucks , i was gonna get a 2.5 and get an old man emu coil springs what lift it another 1.75 I was wondering if there is any other ways out there i know it's difficult for independent front end 

×
×
  • Create New...