[Firing issue]

Have the what wired?

[Firing issue]

I'll try that again but I'm pretty sure they are right

[Firing issue]

So I checked my codes today and got 55 no malfunction

[Getting more power out of the VG30.]

I can always look, thank you

[Firing issue]

So I unplugged them both and and it popped a couple of times but now it's back to just turning with no fire

[Getting more power out of the VG30.]

Any cams you would suggest?

[Getting more power out of the VG30.]

I've got thorley headers and 2.5" all the way back

[Getting more power out of the VG30.]

Thank you

[Getting more power out of the VG30.]

I'm just thinkin I could use a bit more juice tryin to get up so of the more intense hill clombs

[Firing issue]

That might be just what I need

[Getting more power out of the VG30.]

After I get my beast running again I want to do so me work to give her more power. It's my daily but I also take it off-road at least twice a week (when it's running). So what would y'all suggest and what have you already done to increase HP and Torque?

[Firing issue]

So I checked my timing, it was good, spark was good, ( I might have the fuel lines mixed up but I'm pretty sure they aren't) and I moved the distributor one tooth because it didn't look right and when I cranked it over the engine ran for a good ten seconds then cut out and it won't start again

[Firing issue]

So I got it to run for a few seconds than it quit

[Firing issue]

I'm going to work on it right now, wish me luck guys!! I'll let y'all know how it turns out

[Firing issue]

My one question is when it's on the compression stroke neither of the valves are open correct?

[Firing issue]

I read through that whole thread a couple of times now I made sure that this that the truth count was great and everything was perfect

[Firing issue]

What is a CAS?

[Firing issue]

So I'm new to pathfinders his do I check codes? As for whether or not it does anything, no but occasionally it pops and I was just told to crank it over and use the timing light

[Firing issue]

So the weird part is that I have compression and the timing is right( checked with timing light) but it still won't run, somebody told me it could be a sensor but weren't to clear on which sensor would keep the engine from running.

[Firing issue]

I'm really sorry about that, how do I fix it?

[Firing issue]

So I've got the vg30 and I recently did a head job and now it won't run, timing is right, dizzy is in correct position at tdc, I've got spark and fuel but no fire.. Any idea what my problem might be? Thanks in advance y'all.