-
Posts
172 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Posts posted by nismopathy93
-
-
Shoot damn tapatalk strikes again i was on page three needed to read four!!!
-
Wow if this is how totm works i hope i never make it in?? What the f?? Just like needing 100 posts to be nominated you should need 50 to vote i think to curb the bs???
-
looks great man!
-
My cousins pathy had those symptoms once and it took me a bit to nail it down but when I swapped in my spare distributor she ran like a whole new rig the bearing likes to seize up some when they warm up when they are going out. you can just replace the bearing with a bit of work!
-
man this is a freakin nail biter I really kinda wish I could vote both them bad ass rigs in but since stalker is running my parts I have to vote him even though they are both awesome man!!! pamountainbiker your rig is sick!!!
-
Currently work construction mainly concrete work and excavation but the outfit i work for does it all pretty much so i get to do everything
-
Lol thats pretty funny i didnt even realize that
-
Welcome i am near pdx let me know if i can help with anything?
-
Welcome good luck on your build!
-
Damn i hate tapatalk two posts alot!
-
Welcome when your ready to sas let me know i can help you out!!
-
Welcome when your ready to sas let me know i can help you out!!
-
leafs are just plain basic and reliable and stupid simple that is why I love them!!
- 1
-
springs are 400 an end and the hanger and shackle kit is 275 shipping included on the hanger and shackle kit but not on the springs. It is super simple to cut off the ifs and weld on the hanger and drill the frame for the frame tube!! I use trail gear shock hoops and get shocks from them as well cuz they are cheaper then I can make the hoops
IceMan2989 I have never put the kit on an r50 since they are a sub frame I dont think that if would work well for you?
-
-
I build custom springs that you can get in any lift and push your axle how ever far forward you want they are a bit more money then some places but are all usa made and dont sag out with in the first few trips like some do.
that has a set of my springs on the front
-
you can get a chevy 205 and then chevy running gear and throw on some leafs your front will be a low pinion which will suck but lots of guys do it. I can hook you up with a sas swap kit to put the leafs on if you want one just pm me for more details! the only thing as far as auto to stick is you need to figure out your neutral safety switch wire so it will start any one that has done a 5sp swap already should be able to help you on that one. 4x4parts.com sells sbc motor mounts
-
As far as d44s go the best is 77 and earlier f-150 axle with 3 inches shaved off the long side it works killer!!! I cant seem to load pics from my photobucket tonight but if you go to facebook.com/bonneymotorsports you can see pics of two nissans running custom hp 44s
-
much sexier then mine i had no bender and used old pipe lol!!
-
I will send you pics tomorrow of my hb I cut apart the factory y pipe rotated it up bought a 90 and used some of the old pipe and made it all work
-
good to see it out of the shop dont for get to send me some more pics with the front drive line and shocks moved!! Now that you moved that hanger your tg springs have your axle sitting right where my springs would have put it so that is a good thing too!!! still too bad that you had to fix that stuff!! keep me posted on your buddy too!!
-
sounds sweet check out the new pathys rear suspension my 2010 drives and rides sweet I cant wait to play in the snow with it having the irs and traction control crap that it has!!
-
looks nice man!!
-
I wheel at browns camp in the tfs mostly and there is full width rigs there all the time I just wanted some thing differnt. I may decide to narrow the stuff down the road but I have never ran full size before so I just thought what the hell
EXO cage
in Solid Axle Swaps, Hardcore Custom Fab
Posted
looks really good man!!