87Elephant
-
Posts
17 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by 87Elephant
-
-
soo i know i can use waggy leaf springs up front.. but what other ones can i use?? and also can i use any rear leafs up front?? sounds dumb but my buddy said its possible... so please! any info will be very helpful! thanks
! -
hey guys so i have this offset rearend dana 44. its narrowed.. drum 6 lug.
and i got this narrowed dana 44 front axle today
and since the rear axle is offset to the passenger side.. can i use that rear axle???
-
so i wanna sell my cat.. but i cant figure out if it has to pass emissions.. its 20 years old.. and i thought if it was 15 and older.. it didnt require emissions.
does anyone know more about this subject??
Washington People
Thanks! -
dude..
search.. hate to be a dick, but i've answered this question several times this year on this site.
ahh i feel dumb as hell.. lol , yaa i was just being lazy ha
-
what kind of axles should i run?
and springs or coils?
Thanks
-
no, not that rare.
probably 19 spline. not strong.
there were in many jeeps with dana 18 t case IIRC.
is it a full floater? hard to get parts for it and aftermarket stuff is expensive.
oo.. lol , well then jeep people are sort of.. ehh cause all the jeep forums say n offset dana 44.. is like rare and goes for like 300 bucks.. haa , and its not set up for coils in the rear.. and itll require some welding.. and i dont have a welder.
lol prolly for christmas tho! , idk.. sell it and buy a dana 44 for the front -
is anyone familiar with it?? cause i purchased one complete one today for 50 bucks. gears are 3.08
ive been lookin up info on them.. they seem pretty rare..
could possibly sell for alot?
-
There's a fuse for the brake lights labeled STOP LAMP. Check to see if that fuse is good.
aight well i jsut checked it.. the fuse is still good..
-
okay so my break lights dont work on my 89.. i switch out the brake switch from the break pedal.. with the one from my 87 to the 89.. yet there were two switchs on the 89.. should i replace just the one with the other... or replace them both..?? OR! might there be something else casuing my break lights not work.. , the bulbs work.. because im using the ones from my 87..
-
i adjusted the wheel stopers so i can get more turning. my question is the cap that goes on the bolt it has a plastic inside and a thin metal cap. do they sell just the stopper caps? if so where can i get it? thanks
did you paint your stock rims black?
-
The switch part should interchange with any year, I have the electrical end off of a 94 in my 88, and it was the exact same as the original 88 one, same connector even, which was the biggest shock.
okay , so its with what your saying its just plug n play? okay thats good to know
cause i really wanna be able to drive it around and park it without the chance of it getting stolen 
-
As long as the 89 is a TBI injected 2 door, I'm betting there would be no issue??
One good double check is to go to a parts site (like rockauto or courtesyparts or something) and look up the parts you want to exchange to see if there are different listings/part numbers for the different years. It's not a perfect check, but a good place to start.
B
BTW, isn't that Steeevo's truck?? (ruggedrocks.com)
Ok thanks
i hope itll work , oo idk i just snagged a pic off the internet real quick.. was in ahurry had to got o the dentist.. -
I have a ingition problem with the 89 , it doesnt have a key to start so i bought it without a key , but it has a switch thatll start it with anything flat.. screw driver..other keys.. sometimes dimes.. Ghetto i kno
is there any possible chance i can switch the ingition from the 87 and install it in the 89. ? would it work?
Leaf Springs
in Solid Axle Swaps, Hardcore Custom Fab
Posted
yeah use leaf springs for my sas instead of running coils.