jwmyers23
-
Posts
228 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by jwmyers23
-
-
Sorry my computer took a crap on me. It was on the lift held up by the frame. I have a 3" lift, 26" long shocks and no sway bar.
-
Yeah that was my plan but they are bigger than what I had in mind, but at $16.50 each I'm not complaning. The only way I could have mounted them to the light bar was to cut my grill. That's why they got mounted to the bumper.
-
Finally got some lights. I need to wire them up now.
-
I have a set of Nology Hot wires, Accel ignition coil, and NGK spark plugs.
-
A friend said he has a built 4.3 that he would sell me cheap
-
I built a speaker box today. I'm going to wire it tomorrow.
-
So I just found a Chevy v6 vortec engine on craigslist for $80. I was wondering how hard it would be to put in my pathy. I don't know that much about electronics or engines for that matter. I was thinking of buying it and trying to rebuild it and doing a swap. I have a couple friends that know alot about engines and are willing to help. Any thoughts?
-
went to JY and got a new center for the steering wheel and new taillight. While I was there they set fire to a van trying to cut the cat off. Then I picked up my new torque arms. They are not cheap $88 for both. Maybe I can talk the bank (wife) into letting me get new sway bars soon.
-
I Seafoamed her today it worked wonders on the old girl. I didnt get a steering wheel maybe tomorrow. Torque arms should be in tomorrow too.
-
Went and got gas. Got pissed because tbars and torque arms are shot making the tires rub over every little bump. Took out anger on steering wheel. When i got home i ordered new torque arms. Going to jyd tomorow to get a (new) steering wheel. Think i might order new tbars too.
-
0 miles 0 time UNEMPLOYED for the last year.
-
I have installed a 3" suspention lift from 4x4parts.com (I think that's what everybody calls AC). I got the rear springs and the UCA's. After the install I had the pathy alined and now it sets like it has a rake to it. The question is would new torsion bars level it out and if so what would be the best and fairly priced ? I have to replace my bars and torque arms any way due to the pathfinder becoming airborne and landing hard. It stripped out the tourque arm and the only way I could get the old girl to keep her nose up was to weld the bar and arm together (I know heating the bar will take the spring out out it). I need to get it fixed asap !
Here is the stripped torque arm.
-
jwmyers23 is easy my name is Jason Wayne Myers the 23 is my old rc racing number.
-
Wow... That is really cool. I guess you know your a Pathy fan when you get one of those... My wife would kill me...
It's always easier to ask for forgivness than it is for permission
-
My Traxxas 2.5 T-Maxx with a pathfinder body
-
My complete list of cars:
1988 Pontiac bonniville(Bought Toyota)
1994 Toyota truck 4x4(Hit telephone pole)
80's S-10 Blazer 4x4(Transmission problems)
80's Mecurey Cougar(Blew the engine)
2000 Nissan Frontier 4x2 (Repossesed)
1993 Ford Tempo(Transmission Failed)
Ford Taurus(Epic engine failure)
1996 Dodge Ram(Rolled)
2004 Pontiac Grand am(Gave back to my mom)
1995 Nissan Pathfinder(Hope to have forever)
If you counted thats 10 vehicles and I'm only 32!!!
-
My 80 something 4.3L 4x4 S-10 Blazer I had in high school. I really liked that thing but I always had tranny problems with it.
1996 Dodge Ram 1500 4x4 Centurion edition I bought after I got out of the Navy.
I lost control on some ice and tagged a tree.
Fixed it and added a ram air hood.
Then one night going home from my girlfriends (now wife) house I tried sleeping and driving. It turns out that I'm not to good at it. I don't remember a whole lot about the accident but the state police said that I flipped 4 to 5 times. I was ejected and tossed about 15 feet away from the truck. I was very lucky the only injuries I had was a small cut on my back and a huge brush burn on my sholder. It could have been much worse.
-
Looks kinda weird right now without the ends on. Need to get more pipe to finish the bumper.
-
yep thats how i hooked it up.
-
center part of bumper is on. Pics coming soon. Had an idea today it involves dimond plate.
-
Work/backup light
-
Yep if you look at the bumper on the Cherokee you can see the shackles I'm not 100% sure about lights yet
-
No official date set yet. It will be sometime this spring. Just have to finish my neighbors Cherokee. Will let you know when we are going.
-
I like it, but am biased
move it down a little and put an 'auxiliary reverse light' on!
I have a rectangle one. I just need to mount it.
What did you do to your Pathfinder today?
in The Garage
Posted
I replaced my tie rod ends, tie rod adjusters, and idler arm. I also made an idler arm brace and tossed that in there too. My new center link should be in on Friday.