Jump to content

Due to a hardware failure on the hosts systems, all posts and messages created between May 26th and Jan 13th have been lost. Additionally, if you joined the NPORA Forums community during that time, you'll need to re-register. -NPORA Mod Team *Updated: 05/19/2022 12:15AM PST

RedPath88

Admin
  • Posts

    29,046
  • Joined

  • Last visited

  • Days Won

    62

Status Replies posted by RedPath88

  1. Will a Sunex 10202 4 wheel drive spindle nut work on the 1995 pathfinder front axle nuts. Need to know before I start taking things apart    Thank you

    1. RedPath88

      RedPath88

      You'll be more likely to get a response by creating a topic in the 90-95 WD21 section. If for no better reason that visibility, as a lot of members to do pay attention to status updates ;) 

  2. Hey look at that... I just tipped over the 1000 posts benchmark! YAY!!!

  3. It's that time of year again to start tracking down some chains if you don't have any for those winter exploration mission!

    1. RedPath88

      RedPath88

      Chains?

      Never used them!  ;D

       

      If you're in Les Schwab territory , they can be returned in the spring for a full refund, if unused.

    2. (See 1 other reply to this status update)

  4. Snohomish county in Washington is apparently a haven for car thieves.  

     

    Now my 1988 Pathfinder has been stolen, partially stripped and damaged.  I got it back, but it was no longer drivable. The radiator was blown apart and a bunch of wiring was torn out of engine compartment.  I had insurance coverage through state farm, but they are doing all they can to get out of paying for the claim.  They sent Kim Robinson to talk with me about the claim this week, but it was really a 2 hour interrogation and not at all intended to resolve the claim.   I was insuring a lot through State Farm until that meeting.  My monthly premiums were over $400 for my Carver Yacht, 2006 Truck, the Pathfinder, and renters insurance.  Now everything has been moved to Progressive and Metro Mile Insurance companies.  

     

    She asked me stuff like how long I worked for my employer, why I chose to not insure some of my vehicles for periods of time. Why I owned some vehicles that I didnt drive daily. Essentially, she was convinced I am trying to do something shady and she is on a fishing expedition to find out what exactly.

    1. RedPath88

      RedPath88

      Damn Jim, sort to hear... again!  :(Maybe on the next one.. and any current vehicles... invest in a full featured alarm. Along with GPS Tracking. Trust me it's worth it, though I doubt I need to justify it, too you, now.

    2. (See 4 other replies to this status update)

  5. I'm about to install my 2.5" lift spacers on my 03 R50 Pathfinder. I've read a lot about camber bolts and springs/struts/shocks as necessary upgrades after lifting. I'm hoping that someone can give me some installation advice but most importantly some links to camber bolts and other parts I will need. Thanks!

    1. RedPath88

      RedPath88

      This may better serve you as a topic, as many  people pay no heed the status updates. ;)

    2. (See 1 other reply to this status update)

  6. Getting my MT fluid changed tomorrow. Let's see if that bearing quiets down for a while ?

  7. I need help to get my 1995 Pathfinder XE, auto trans going again. Was cutting out and then stopped all together. Replaced battery, dist cap, fuel filter, Coil checked out good at AutoZone but not sure if it was checked correctly. No spark and will not start ( obviously ) Had speaker hooked up in back of rig, that were stolen and at that time found the positive wire from them hanging down. That is when my problems started with engine cutting out, Could that angling positive wire have shorted out my system ??

     Thanks. I need all the help I can get, Fred

    1. RedPath88

      RedPath88

      For technical help it is best to use a standard forum topic, like the one you created here HERE.

      I am going to lock this Status Update so that replies trying to help are centered in the thread for simplicity :Aok:

       

       

       

  8. Well, it's gone.  Hopefully the new owners take care of it like I did, they seemed like good people who know what they're doing.  Doesn't make it hurt less.  ?

    1. RedPath88

      RedPath88

      It's never good to hear of a Pathy leaving a fellow members family, but it's also a little reassuring that it may have gone to good hands. Did you direct them to NPORA? ?

    2. (See 4 other replies to this status update)

  9. Just wanted to take a moment to thank everyone on this forum for all the help that has been provided to myself and others, as of today I've finally figured out the fix to my ABS light which has been on for almost 10 years now. The Pathy has never looked/functioned this good!

  10. hola gracias por aceptarme 

  11. Looking for some M/T's

    1. RedPath88

      RedPath88

      BFG MT's also have great traction!  They may cost a little more than some others, but over the years BFG's have never failed me and I've run a couple generations of MT's on a couple different trucks, including AT's on the Pathy (be wary of wet roads with NON-siped BFG AT's) before moving to BFG MT's.:aok:

    2. (See 2 other replies to this status update)

  12. Very sadly getting rid of the R50 before winter. Looking at WD22 Xterra's, but the interior feels so cheap and crappy by comparison...

    1. RedPath88

      RedPath88

      Nope you answered it. Have you considered another R50 so you can just swap mods over? maybe a rust-free west coast model. As for the WD22, I understand getting the REAL NexGen Pathy :P:D

    2. (See 4 other replies to this status update)

  13. Very sadly getting rid of the R50 before winter. Looking at WD22 Xterra's, but the interior feels so cheap and crappy by comparison...

  14. Sad news everyone, I regret to announce that Marvin is no more. The story of why: During the last dump of snow here

  15. Can I get a site admin or moderator to contact me to work on editing rights for a thread? Just spent 20 mins typing a full edit and when I went to post, it said "YOU DONT HAVE PERMISSION" and dumped the entire post.

    1. RedPath88

      RedPath88

      Thanks, I'll get back to you on that. Did you also want a post edited?

    2. (See 4 other replies to this status update)

  16. Can I get a site admin or moderator to contact me to work on editing rights for a thread? Just spent 20 mins typing a full edit and when I went to post, it said "YOU DONT HAVE PERMISSION" and dumped the entire post.

    1. RedPath88

      RedPath88

      The server move is stalled due to time restrictions (in my personal life.) But either way, a server change will not alter the edit timeframe, that is restricted due to serious abuse in the past. :(

    2. (See 4 other replies to this status update)

  17. Can I get a site admin or moderator to contact me to work on editing rights for a thread? Just spent 20 mins typing a full edit and when I went to post, it said "YOU DONT HAVE PERMISSION" and dumped the entire post.

    1. RedPath88

      RedPath88

      Edit time fram is 10min from the moment the original post is made.

       

      PM me a link to the post you would like to have edited AND the ENTIRE edited post, exactly the way you want it to appear and I will make the edit for you.

    2. (See 4 other replies to this status update)

  18. Just recently figured out I got caught right in the middle of a scam at the mechanics, explains why my car has been taking 3 months to be returned. Spoke with the owners of the shop, got it figured out. Employee got fired and my car is finally getting serviced. AAMCO transmissions, avoid them at all costs.

    1. RedPath88

      RedPath88

      I've only ever had one trans rebuilt by a shop, after nothing more than speaking with AAMCO, I went to a small local shop. Cost a little more, but I never regretted it!

    2. (See 3 other replies to this status update)

  19. Anybody have a line on a cheap Pathy in the Spokane/Valley/Newport area?

    1. RedPath88

      RedPath88

      that goes back to the 80's... at least ;)

       

      Glad you found one!

    2. (See 3 other replies to this status update)

  20. New laptop...Good to be back!

  21. Still wonderin' why the rear wiper doesn't work....

    1. RedPath88

      RedPath88

      When I first bought my Pathy I had the same problem, tracked it down to a bad connection at the motor.

    2. (See 1 other reply to this status update)

  22. Proud father of a healthy baby girl. Layla Marie Cox 12-2-16

  23. 1988 WD 21 engine blown. Now what?

    1. RedPath88

      RedPath88

      Decide if to you the truck is worth keeping. If it is then start looking at options such as, an engine rebuild and new or used engine replacements. If not then decide if you want to sell it whole to a private buyer or wrecking yard or possibly part it out.

    2. (See 1 other reply to this status update)

  24. Had a guy come up to me in the parking lot of my college, to ask me where I got my NPORA sticker. Does anyone still make them?

Welcome to NPORA Forums

 

Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.

 

-NPORA

×
×
  • Create New...