Jump to content

Due to a hardware failure on the hosts systems, all posts and messages created between May 26th and Jan 13th have been lost. Additionally, if you joined the NPORA Forums community during that time, you'll need to re-register. -NPORA Mod Team *Updated: 05/19/2022 12:15AM PST

Leaderboard

Popular Content

Showing content with the highest reputation on 03/03/2022 in all areas

  1. Hey R50 people! You might have seen my posts on Facebook groups or instagram, but I also wanted to be present here as I've enjoyed browsing this forum numbers of time. Those of you who don't know me, I'm based in Vancouver BC Canada and I created a sweet roof rack for all R50 models. I was inspired by Prinsu obviously and since there are no aftermarket solutions for R50 I decided to make my own rack. Please check out some details, information, manual and more photos at my google drive: https://drive.google.com/drive/folders/14yxt2aZX2_KDKsw74M9Ft5XpMms7hF-H?usp=sharing Let me know if you have any questions! I've sold a few already so you might start seeing those racks on R50s! Thanks! Pawel
    1 point
  2. Well it appears we lost almost a year of posts here so I thought I'd repost some of what I had done in that time just in case any of it will be helpful to anyone in the future. U-Bolts for mounting X-Bull type traction boards to the SE Roof Rack. I added adhesive felt to the top, and shrink wrap to the bottom to help protect the rack: Installed Midland MXT275 mobile GMRS radio installed in upper-portion of the center console with supplied antenna on the roof (excuse all the dog hair in these shots): Short antenna from cravenspeed.com. I was tired of the huge factory antenna getting hung up on branches of narrow trails. This is listed on their site as a Nissan Frontier part but works great: And some beauty shots C/O @PathyDude17 & @zakzackzachary & myself, as well as a video walkaround on Tyler's channel: Up next is a set of skid plates & missing link that is on order from SF Creation...
    1 point
  3. New roof rack is finally on. Some small stuff is still needed but here’s a pic of how it sits. I am extremely happy with how it turned out. Of course this wasn’t possible without [mention]hawairish [/mention] A big thanks to him for always willing to help in any way he can. He was behind the design and fabrication of the brackets that hold this thing together. At 72lbs, it isn’t the lightest but will out perform almost any off the shelf roof rack. We’ll continue the build tomorrow so I’ll have more pics then. Sent from my Pathfinder
    1 point

Welcome to NPORA Forums

 

Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.

 

-NPORA

×
×
  • Create New...