Jump to content

Baker95pathy

Members
 View Profile  See their activity

  • Posts

    23

  • Joined

  • Last visited

About Baker95pathy

  • Birthday 06/08/1984

Previous Fields

  • Your Pathfinder Info
    95 nissan pathfinder
  • Mechanical Skill Level
    Wrench And Socket Set Mechanic
  • Your Age
    30-35
  • What do you consider yourself?
    Weekend Warrior
  • Model
    XE
  • Year
    1995

Profile Information

  • Gender
    Male
  • Location
    Tennessee
  • Country
    United States

Baker95pathy's Achievements

NPORA Newbie

NPORA Newbie (1/5)

0

Reputation

  1. Baker95pathy
    The switch is off and when I turn it on it runs higher rpms
  2. Baker95pathy
    Yes overdrive is working. It shifts through every gear fine .
  3. Baker95pathy
    I think I have a bent valve or more than 1. I'm ganna check compression to be sure but probably ganna get knew heads. But should I rebuild the ones I have or get new or get some off of a wrecked junker.
  4. Baker95pathy
    I think I have a bent valve or more than 1. I'm ganna check compression to be sure but probably ganna get knew heads. But should I rebuild the ones I have or get new or get some off of a wrecked junker.
  5. Baker95pathy
    Ok well I turned the engine about 10 to 12 times by hand and my marks on the belt and the gears are different every time. Shouldn't they line back up after a few rounds.
  6. Baker95pathy
    Ok well I turned the engine about 10 to 12 times by hand and my marks on the belt and the gears are different every time. Shouldn't they line back up after a few rounds.
  7. Baker95pathy
    Yes
  8. Baker95pathy
    Ok all timing is correct but it still won't start. It will almost start but then it just starts turning slow again. Still has a little back fire but no flame out the breather anymore. I'm stuck.
  9. Baker95pathy
    Ok all timing is correct but it still won't start. It will almost start but then it just starts turning slow again. Still has a little back fire but no flame out the breather anymore. I'm stuck.
  10. Baker95pathy
    Ok I counted the teeth on the belt and I was 1 off on top fixed that. Now I'm ganna check the ignition timing again to see where I'm at.
  11. Baker95pathy
    Should the cams be hard to turn. My crank is a little tough to turn but that's normal what about the cams.
  12. Baker95pathy
    Should the cams be hard to turn. My crank is a little tough to turn but that's normal what about the cams.
  13. Baker95pathy
    Ok I do not have a way to test compression but when I try to start it with the breather off it occasionally blows a flame out the breather.
  14. Baker95pathy
    I just bought a 95 nissan pathfinder. It has set for 4 months. The guy said he the timing belt broke he replaced it but it would not start. I checked and the timing was not set correctly. I set it correctly but it still won't start. The engine seems to be turning slow to me. I'm getting fire and I'm pretty sure I'm getting fuel because when I pulled out a plug it smelled like gas. Can someone please help me.
  15. Baker95pathy
    New timing belt but won't start
×
×
  • Create New...