Jump to content

95redpath

Members
  • Posts

    24
  • Joined

  • Last visited

Previous Fields

  • Your Pathfinder Info
    95 pathfinder se, summer project
  • Mechanical Skill Level
    Wrench And Socket Set Mechanic
  • Your Age
    22-29
  • What do you consider yourself?
    Weekend Warrior
  • Model
    SE
  • Year
    1995

Profile Information

  • Location
    Oregon
  • Country
    United States

95redpath's Achievements

NPORA Newbie

NPORA Newbie (1/5)

4

Reputation

  1. New rear links Sent from my SAMSUNG-SM-G890A using Tapatalk
  2. So I have the rebuilt vg33 in my 95 pathy, iv read it's normal to have white smoke until everything sets in but I wanted to see what you guys Thought? And how long dose it normally take? It only has about 60 miles on it now but since I'm still working on it I only run It once or twice a week. Sent from my SAMSUNG-SM-G890A using Tapatalk
  3. Did the tire rack and rear bumper with rubberized undercoating go the cb antenna and jack mounted Sent from my SAMSUNG-SM-G890A using Tapatalk
  4. My HD rear links from ruggedrocks will be here this week. Then that's the last major thing. Decided not to do the rear locker and the electric fan Sent from my SAMSUNG-SM-G890A using Tapatalk
  5. Pretty much done with the finder. Installed the 3in lift coils and super lift uca's Sent from my SAMSUNG-SM-G890A using Tapatalk
  6. The front is pretty much done just gotta do a final over look to make sure everything is in order. Sent from my SAMSUNG-SM-G890A using Tapatalk
  7. So I started my suspension on the finder and the moog upper ball joints Dont fit the supper lift uca's..im hoping I just received the wrong ball joints, I'm gonna do a little more investigating tomorrow morning, has anyone used them with the uca's? Sent from my SAMSUNG-SM-G890A using Tapatalk
  8. Have some electrical problems going on, the tac is going crazy, gas gauge not working and check engine light came on...also after the swap it been really rough starting it idles fine and runs good. Sent from my SAMSUNG-SM-G890A using Tapatalk
  9. Got the finder up and running, looking pretty good now it's time to do the suspension and all the other stuff Sent from my SAMSUNG-SM-G890A using Tapatalk
  10. Had my buddy take a look at it with me, conclusion is we have to reseal the oil pump to the block Sent from my SAMSUNG-SM-G890A using Tapatalk
  11. I hope it's a simple fix, I was wanting to finish the engine and all that before starting the suspension so I have a nice build up of parts sitting around Sent from my SAMSUNG-SM-G890A using Tapatalk
  12. If I remember correctly the headers were like 230$ not positive. And it's heat wrap. It runs great and is very responsive. But after letting it sit and run for a while there is a small oil leak coming from the front of the motor somewhere have to figure out where from Sent from my SAMSUNG-SM-G890A using Tapatalk
  13. Ya they are the correct fit and it's the Oregon coast so we get surface rust, but iv never seen a vehicle around here that was horrible with rust Sent from my SAMSUNG-SM-G890A using Tapatalk
  14. It's just the pacesetter logo, I was kinda on a budget so I went with the cheaper headers, some say they are worthless some say they are ok, so I guess I'll find out Sent from my SAMSUNG-SM-G890A using Tapatalk
  15. It's getting there slowly but surely Sent from my SAMSUNG-SM-G890A using Tapatalk
×
×
  • Create New...