yar1
Members-
Posts
154 -
Joined
-
Last visited
About yar1
- Birthday 02/01/1990
Previous Fields
-
Your Pathfinder Info
1996 SE
-
Mechanical Skill Level
Screwdriver Mechanic
-
Your Age
16-21
-
What do you consider yourself?
Weekend Warrior
-
Model
SE Offroad
-
Year
1996
Contact Methods
-
Website URL
http://
-
ICQ
0
Profile Information
-
Gender
Male
-
Location
orange county, CA
yar1's Achievements
NPORA Veteran (3/5)
0
Reputation
-
i live on the border of orange and san diego, id be down for pretty much anything a stock r50 can do on most weekends. email me if you guys do anything.
-
anyone know if this is still there?
-
im trying to put a cv into the pass. side of my r50, ive done the other side 3 times or so and can do it in an hour, but im having an issue with this side. i can put 2 (1 pair) of the bolts in , and get 2 more to fit in the holes, but the last two holes do not line up, is there something special on this side that needs to be done? i compared the new to the old axle an d they line up fine. any suggestions on how to get this in?
-
the duralast is rebuilt, and make sure they test it at the store before you leave.
-
a week or two after? i finish w/ school on the 13th, so most schools should be done by then also.
-
FRS will be in use, not CB?
-
15050 Rogers Rd, Patterson, CA is the address of the jack in the box.
-
i have a CB currently, would a frs be better?
-
im coming from oakley so it would be easier to for me to meet in patterson, at the jack in the box there?
-
either one, schedule for work isnt made yet so ill ask for both off.
-
it ended up being a loose swaybar endlink, i had to put a allen wrench in the bolt while tightening the nut.
-
I replaced the struts & strut mounts on saturday and broke the CV axle in the process when i pushed down/pulled out on the hub/rotor, so i replaced it. now most of the time when the suspension moves IE turns,bump,etc, it makes a popping noise, i thought this was a bad CV so i replaced it again, what else could it be? i did notice im missing an oring between the snapring and the hub, could that be causing this?
-
autozone/kragens/etc can probably order the stock ones for you.
-
so is anything coming for a bumper?