Jump to content

guampath

Members
  • Posts

    23
  • Joined

  • Last visited

About guampath

  • Birthday 01/28/1989

Previous Fields

  • Your Pathfinder Info
    running a 97path on 31's soon to have a full exoskeleton and a 6" lift
  • Mechanical Skill Level
    Standalone Tool Chest Mechanic
  • Your Age
    16-21
  • What do you consider yourself?
    Weekend Warrior
  • Model
    Other/Unknown
  • Year
    1997

Profile Information

  • Gender
    Male

guampath's Achievements

NPORA Newbie

NPORA Newbie (1/5)

0

Reputation

  1. guampath

    welding

    http://doit101.com/Images/stickwelder.jpg what about that that should get all the stuff done good reight
  2. if anyone knows whats going on you can email me at vinceishere18@yahoo.com cus i check it all the time
  3. ok i sold my path and got a 1986 nissan 4x4 just wanted to know if anyone knew what the hell is going on ok its a napz with weber 40's the problem that im having is trying to start the engine it will start to crank then you will hear a ping or something and it will stop cranking the starter is good tested it. can anyone know what can be wrong with it one other problem im having is when i did have it running i can rev it till it wants to shoot flames but wheni put it in gear and let off the clutch it will kill its self tryed to pop the clutch and go but still kills its self (i need to redo the fuel lines not setup right) thanks guys hope someone can help me
  4. guampath

    welding

    seen alot of people have this one lincoln mig welder 3200hd seen it at homedeopt and napa or something just like it but would this be able to weld up a cage some chassis welding with out having to come back after every run on the trail just to find out that the welds that i just did cracked or what not or get out on the trail and role the 4000LB truck over thinking that the cage that i just did is going to save everything but just falls apart. as for the metals that i would use i can use just about anything cus one of my friends dad own a shop that i can get it from for CHEAP
  5. guampath

    welding

    alright well i was looking at some mig welders and seen some from 100-1300 dollars i know who to weld from school and all that but as far as picking what welder to but i have no idea so for all you out there who have one let me know what i should get "i want to do some tube welding for like a cage for the truck, some solid bumper welding like the ones you see on https://www.4x4parts.com and just some frame welds that need to be done other then that i think thats it dont really want to spend 2000 on a welder if i dont have to and i dont have all that much time to work on the rig
  6. only that one for the miss fire havent ran it for any codes lately but did pull the fuel filter and was shocked by what i seen gas in the filter was black black and there was alot of dirt and grind in there so i changed it but dont know if my gas tank is the same way or if my injectors are clogged
  7. what trans would be the best or should i say what does everyone use?
  8. its a strong engine you just have to find those small things that are cheap and break easy or just go out on stock but with all that said i still have yet to find whats the problem, not that i cant find it i just havent had the time or anyone to help me. like turn the key so that i can see if its the distrbuter or what
  9. Ok to day i took off the fuel filter both lines at each end of the filter had gas coming out so i think im going to say that the fuel pump should be good cus theres gas in my lines. i checked the distributor cap for cracks or dust looks good doesnt move around or anything didnt pull out the whole distributor just the cap i was looking at the little tab under the distributor the one that spins and hits all the plug ends looks to be really small but not sure what size i should be yet. all the fuses are good (in the cab and under the hood) cant really take the whole distributor out today cus of the rain, but is there anything that anyone can think of or is there anything that i didnt look for or at that might be the problem.
  10. nice didnt know that thats so much help now that i know that do you know where the ignition coil is at i cant find it any pics?
  11. well there is a tick sound somewhere around the distributor side of the engine but its not that loud and only does it every now and then do go into some big mud pits and here on guam its rainy season. today it just went dead and now i cant start it anymore was thinking it might be the pump but havent had the time to take off the gas tank.
  12. well i was driving my path around the other day and everything was fine the i pulled up to a friends house and it started to get a low idle and jump up and down, didnt know what it was tryed to drive it and then let off the clutch and it died on me started it up again and then took off again and had to give it alot of gas just to take off. as i was driving around after that to try to see if it would go away the truck started to jump almost like i was getting on and off the gas fast but the RPMs stayed the same.stoped and just about red lined it and it went away. got to a shop and did a check engine light cus it came on and it was a ignition miss fire. first thing that i thought was to change my plugs an wires so i did that, then today it started to do it again, rev it and it went away no engine light today. does anyone know what it can be or does anyone know someone that would? going to do a lucus injec clean today and see if it does anything. o yea i have around 195*** miles on her now
  13. i can go 4x4 with no problem i and it will spin and everything i do have a small problem when off roading or not really a problem more a irritation i cant fully turn my wheels unless i start to role but i think its cus of the offset of the paths anyways my problem is only when i hit the breaks or when i turn in stop or driving slow i looked at my steering rack to check if the bushings are ok and the right side looks ok might have to change it soon cus i can only see alittle of it do you think u can take a pic of ur front end the bushings and all the so that i can see whats up with mine?
  14. :doh:i dont know what it is but there is a clunk noise when im sitting there and i turn the wheel about 4 to 5 clunks only on the left front side i can also hear one clunk when im driving only when i hit the breaks and all the weight goest to the front. dont know if this will help or if its something completely different but when im driving i have play in my wheel to the left then i jerk left and right down the road and then i have play to the right go over some bumps and turn left an what do you know i have play to the left. so if anyone out there has ever had this problem or knows what it is just let me know. THINGS THAT I CAN SEE THAT ARE WRONG: 1 CV BOOTS ARE CUT OPEN ON BOTH LEFT AND RIGHT OPEN FOR A LITTLE WHILE. NOTHING ELSE THAT I CAN SEE.
  15. well ihave dana 40s just sitting here and some axles from a land cruser and some other toy stuff sitting around didnt want to take everything off my r50 and then all the stuff i have wont fit. it would be nice to do a SAS but just want to do it right. if anything ill just do the 2" lift and 1" spacers and all that
×
×
  • Create New...