RedPath88 Posted March 15, 2006 Share Posted March 15, 2006 good! I got my front locker and gears put in sunday and i am building my front driveline today.. Looks like i'll be ready to go as well! Building... By chance are you doing the square steel method for the front? Link to comment Share on other sites More sharing options...
87pathy Posted March 15, 2006 Share Posted March 15, 2006 Building... By chance are you doing the square steel method for the front? Nope, I took an old ford drive line, cut it back to the proper length. I then took the old stock nissan yoke (which the OD was too small to work as a pilot in the old ford tube. I welded it up and then machined it back down to the proper diameter to fit tight in the ford tube.. I then made sure everything was level, in line and square to the world.. then welded it up.. Its all done now just have to install it tonight. Link to comment Share on other sites More sharing options...
Mr. Pickles Posted March 29, 2006 Share Posted March 29, 2006 Hi all, sorry to jump to another thread, but this post was already fragmenting as it was. Check this out. How about let's try and keep correspondence flowing through one common point, whether this one or another. Any mods care to corral this? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now