WyKi Posted February 23, 2021 Share Posted February 23, 2021 Hey Guys, so I installed new struts/springs/mounts and sway bar links on the R50 and now when I engage 4-HI it pulls to the left. In 2-HI it drives just fine. Any ideas of what could be the issue? Thanks Link to comment Share on other sites More sharing options...
Slartibartfast Posted February 23, 2021 Share Posted February 23, 2021 That's an odd one. Sounds like something in the front end is loose and when the front wheels are pulling, one of them (probably right front if it's pulling left) is moving forward in the wheel well, screwing up the camber/caster/toe on that side and making it pull left. In 2x, it's loaded the other way by drag, and sits closer to where it should be. Normally I'd guess at bad LCA bushings, but if this started after you did struts etc, I'd check your work there first. Maybe the strut top is shifting around? Seems like you'd have a hell of a racket if something was just loose. Link to comment Share on other sites More sharing options...
WyKi Posted February 25, 2021 Author Share Posted February 25, 2021 Everything was torqued down to spec and double checked on my work. I don't hear any rattle either. It's been cold out so I'll check to see if a lca is bent or something Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now