aceone415 Posted January 23, 2021 Share Posted January 23, 2021 I have an 2000 QX4 bone stock 16 inch rims NO lift, I really like the ProComp #: PCW51-5883 15x8, with 3.75 BS. I'm looking into getting these tires 31" X 10.5" X 15LT Goodyear Wrangler Duratrac. Do I have to lift my rig to have this set up, thanks. Link to comment Share on other sites More sharing options...
gloer Posted January 23, 2021 Share Posted January 23, 2021 Fwiw, I had 31x10.5x15 on my 96 SE before lifting, on stock rims. No rubbing. I just put these on https://www.4wheelparts.com/p/pro-comp-69-series-vintage-15x8-wheel-with-6-on-5-5-bolt-pattern-flat-black-7069-5883/_/R-BKBQ-7069-5883 with 32x11.5x15 and a 2" lift. I've had to do a bit of trimming. 1 Link to comment Share on other sites More sharing options...
aceone415 Posted January 23, 2021 Author Share Posted January 23, 2021 Thanks yeah reading look like it will work. Link to comment Share on other sites More sharing options...
RainGoat Posted January 24, 2021 Share Posted January 24, 2021 Those are good looking steelies for sure! 1 Link to comment Share on other sites More sharing options...
RainGoat Posted January 24, 2021 Share Posted January 24, 2021 Those are good looking steelies for sure! Link to comment Share on other sites More sharing options...
jlduthie Posted January 25, 2021 Share Posted January 25, 2021 On 1/23/2021 at 5:13 AM, aceone415 said: Do I have to lift my rig to have this set up, thanks. No, but some trimming needed. I have almost the same tire and, post 2”-lift, have those wheels as well. There was some rubbing both pre-lift (stock 98 XE wheels) and post lift. Fender liner and splash guard need trimming. Link to comment Share on other sites More sharing options...
The_Oregonian Posted January 26, 2021 Share Posted January 26, 2021 This is very similar to my setup. I have ProComp 252-5883 which is basically the same wheel you are looking at with the addition of fake bead-locks in the same BS/offset. I’m running 31x10.5 as well with a Dobinsons front spring lift (about 1.5+ inches of lift) and they do rub a bit particularly in reverse when turning... I painted the wheels but here is how it looks if it’s helpful at all... 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now