Cliff Posted May 2, 2020 Share Posted May 2, 2020 (edited) A/C does not operate. Problem appears to be with control circuit ECCS control module or Thermal Control Amp. The latter appears to be is a thermister Temp sensor device which I suspect sends a signal to the ECCS (ECM) but I can’t understand how the ECCS powers the AC relay on and off. Is there mechanical switching in the ECCS or is accomplished electronically somehow? Edited May 3, 2020 by Cliff Clarification Link to comment Share on other sites More sharing options...
Mr_Reverse Posted May 6, 2020 Share Posted May 6, 2020 (edited) The ECU controls the compressor relay to switch on and off the compressor. It achieves this by using a power transistor commonly called a driver to drive the relay. It also uses inputs from the pressure switch, ambiant temperature, evaporator temperature, throttle position, and the HVAC control head. At least that is how the North American Pathfinders are. I suspect the Terrano is similar. Edited May 6, 2020 by Mr_Reverse Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now