Jump to content

UPDATE - The host suffered a "Catastrophic Hardware Failure" (*specifics not shared) on 01/13 and the "latest available" backup for the website and database were restored.  At this point they have been unable to recover any later versions of the database.

     We are going to give them another 72hrs to pull off a miracle and find something later than 05/21 before we fully move forward with normal forum operations.  Maybe we'll luck out, but to be perfectly honest, it's not looking good.

     It is still recommended that new members wait to register for the time being, as any new accounts created before our final decision on a path forward is made, may not exist once this is taken care of. This is also true for new topics, posts, status updates, profile & account changes, etc.

 

As always, we appreciate your patience as ask that you hold on just a little longer.

-NPORA Mod Team

*Updated: 01/17/2022 6:54PM PST

02_Pathy's build/shenanigans thread


02_Pathy
 Share

Recommended Posts

Been awhile since I've been on here. Truck is still alive and did some more maintenance like new wheel bearings, U joints for the front driveshaft and brake caliper. Also I was able to pick up some HID retrofits off a guy who was parting out his R50 with a ton of other goodies. After installing the retrofits the clear corners seemed off to me so I went ahead and used a heat gun to melt the glue to take them apart and painted the inside gloss black. Imo it looks a lot bettera629533044cd962fe69b9c10eff7334d.jpg3e9d11aa4928b89b6183691cb436c4dd.jpg8e386ef680e92906ed2f3aebff172732.jpga1a70a954bdf5a01680c72b6da72f9cf.jpgdc0bcbcf4f59576736283ed1453573d0.jpg61ab1f847822bcc265eb060fe68a416e.jpg

Sent from my SM-G960U using Tapatalk

  • Like 6
Link to comment
Share on other sites

5 hours ago, 02_Pathy said:

Been awhile since I've been on here. Truck is still alive and did some more maintenance like new wheel bearings, U joints for the front driveshaft and brake caliper. Also I was able to pick up some HID retrofits off a guy who was parting out his R50 with a ton of other goodies. After installing the retrofits the clear corners seemed off to me so I went ahead and used a heat gun to melt the glue to take them apart and painted the inside gloss black. Imo it looks a lot bettera629533044cd962fe69b9c10eff7334d.jpg3e9d11aa4928b89b6183691cb436c4dd.jpg8e386ef680e92906ed2f3aebff172732.jpga1a70a954bdf5a01680c72b6da72f9cf.jpgdc0bcbcf4f59576736283ed1453573d0.jpg61ab1f847822bcc265eb060fe68a416e.jpg

Sent from my SM-G960U using Tapatalk
 

 

Someday I want to be like you. Looking good as always dude

Edited by PathyDude17
  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Fun little trip up to the hills to run on some mild trails, 1 rock wanted to high five my door, now I'm buying rock sliders lol4e7c5977e6526108608ddf44f2d9ba67.jpg46c2c3db35a50edaaeab809b772462e0.jpgd32d9233a3c0944e21c15355639aa873.jpgac90c5d54f26c9b9e87bb9a3f127623e.jpg6b5a90684b540e8dfa8a68c96b621200.jpg

Sent from my SM-G960U using Tapatalk

  • Like 7
Link to comment
Share on other sites

1 hour ago, 02_Pathy said:

Fun little trip up to the hills to run on some mild trails, 1 rock wanted to high five my door, now I'm buying rock sliders lol4e7c5977e6526108608ddf44f2d9ba67.jpg46c2c3db35a50edaaeab809b772462e0.jpgd32d9233a3c0944e21c15355639aa873.jpgac90c5d54f26c9b9e87bb9a3f127623e.jpg6b5a90684b540e8dfa8a68c96b621200.jpg

Sent from my SM-G960U using Tapatalk
 

I mean sliders are cool and all, I can see how they might be useful, but are you sure your not just tryna copy me?:lol: 

 

Looks good dude. Can’t wait to see you get some sliders! And for our rigs to get more similar again?

Edited by PathyDude17
  • Like 2
Link to comment
Share on other sites

I mean sliders are cool and all, I can see how they might be useful, but are you sure your not just tryna copy me? 
 
Looks good dude. Can’t wait to see you get some sliders! And for our rigs to get more similar again
Copying just a lil bit hahaha hopefully in the next couple weeks I'll get them

Sent from my SM-G960U using Tapatalk

  • Like 1
Link to comment
Share on other sites

  • 1 month later...
On 4/28/2019 at 3:03 AM, 02_Pathy said:

Little project I wrapped up today, got some scene lights and spot lights for the rack. Got the lights off of Amazon as they work for my needs and if I ever want to upgrade to a brighter spot light I can always do so in the future but it works pretty well for the price. The spots are Auxbeam brand and the side lights are Kalwell I believe. Ran the wiring through the superstrut channel crossbar I made and down the A pillar underneath the weatherstrip. I have 360° lighting and will come handy whether camping, in a parking lot or just to see everywhere in a dark area. Some of the pictures are with the normal headlights and then the lightbar and spot lights, then looking to the side without and with the side lights on.8f31c9093f9c31ec0edbf0bf214779ab.jpg584ee9a74cad10ef1b00e10a0efb2613.jpg87444b35fbd8390743b7dc6ecad71aaa.jpg11fe35077062add761298ff1491ea598.jpg427034b070aa1255cd97ef7b182fb210.jpg9d2ab5d8d286f23a88dec1bc77ae2163.jpgbbccaefec0b81ea9b3416a20ba684382.jpgd1d27596a85d618fcf39e3dc90a11146.jpgdc87fbe1b8cefe50c15522e8f3846041.jpg92a6651df75dd31fb7840f8f8359a8a0.jpg

Sent from my SM-G960U using Tapatalk
 

Sorry to bring up and old topic but I feel like adding more lights again, and was wondering what you used to attach the pods to the basket? thank you

Link to comment
Share on other sites

Sorry to bring up and old topic but I feel like adding more lights again, and was wondering what you used to attach the pods to the basket? thank you
I used a superstrut bar and held it to the rack via u bolts and used that to mount the side lights and used auxbeam tube clamp mounts for the front and back pods on the rack

Sent from my SM-G960U using Tapatalk

  • Like 2
Link to comment
Share on other sites

  • 3 months later...

Alright it's been a long time since I've been on here but the rig still exists in my life but now I'm addressing the huge oil leak I've had for a year or so and always put the job off to the side as it's somewhat a big one for a $20 part. Upper oil pan seal is completely shot with the RMS only weeping just a little bit of oil. Had to remove lots of large components to get the tranny out like the front diff, exhaust, drivelines obviously and other tid bits which add up time. So far got the flex plate off and called it a night and hopefully will resume next weekend.956f94e50a74c4f2647a46b6a9b4e836.jpga6710c37d52355653b94de1004a24867.jpg5cafcaba0a08161c789abbd47c5bb9d2.jpg333488649227663ea8536e80a14d4efe.jpg

Sent from my SM-G960U using Tapatalk

  • Like 5
Link to comment
Share on other sites

Yikes man, that kind of job is probably my biggest nightmare when it comes to the pathy
 
 
Yeah its definitely a nightmare come true for me lol

Sent from my SM-G960U using Tapatalk

  • Like 1
Link to comment
Share on other sites

Making slow progress due to work but finally got the oil pan off and with@TowndawgR50 swinging by and giving me a hand. Upper oil pan seal was broken in half so explains why it was pouring out. Getting the pan off was surprisingly easy as the RTV wasnt really holding it anymore as well as the RMS.3adf0c8f5a574f206b3298c096909799.jpgfc0f29bf051b44981457ee3d26407fe2.jpg515c44eceadf0d7ff484582c2f75ac65.jpgfa14f9dcecde38342aafa96dbe22bb84.jpg

Sent from my SM-G960U using Tapatalk

  • Like 6
Link to comment
Share on other sites

  • 3 weeks later...

Should probably update this so you guys don't think I'm working on this thing forever lol. After 3 weeks of tedious work I finally got it back together and thankfully no leaks! This is definitely a big job to do nevertheless but totally worth it in my case as I would drip about half a quart of oil after parking... yeah. Also in the meantime while I had the rig apart@TowndawgR50 helped me install the Pines to Spines 4" SFD kit which also made it possible to take my oil pan out and access other parts of the vehicle. More details on that later...

Also after this huge project and with addition to the SFD I have replaced and installed:
New OEM motor mount
Denso Starter
4" stainless steel braided brake lines from Goodridge
Extended breathers on front and rear differentials
U Joints
New O rings in the oil pan as well as the pan gaskets and RMS
IVAC gasket
3d77adc1517460cfa0e2ba9946c71475.jpg5f28d86800be1287f1c23a3675363b01.jpga8f5d0cd0c544bb1b1f643a2480fd6fa.jpg

Sent from my SM-G960U using Tapatalk

  • Like 11
Link to comment
Share on other sites

  • 2 weeks later...
  • 10 months later...
  • 2 weeks later...

Been quite some time but updated/upgraded the pathfinder since the last time I worked on it. I purchased some Warn Manual hubs for it as well as Method MR309 Grids in titanium gray on sale with 4.75” bs. The hubs went on super easy and I didn’t have to change my stock studs out as they were plenty long, I know people in the past had too but in my case I didn’t. With 265/70r17 tires that are a bit worn down I did still have ample room between the strut and the tire. With the new wheels I took off my wheel spacers so I am currently not running any spacers just solely the wheel. Driving around with the hubs unlocked you can tell a difference that there is less front end drag and that you can coast farther without having to be on the gas all the time. Nice little touches to the pathfinder in my opinion!493e3292e7272ef09637dd31e65f5cef.jpg
d3468476f4f1e59c1c00b5eab6d9b749.jpg
5aec0af512cfb45d55901b2cb66b6587.jpg
3177d9d9e3dac3ac8a84ffb73cf95a68.jpg
88a87368288da4ebc480eeaf828545c2.jpg
3bcdf0c6fb4d6a419beda9365688f2bc.jpg
02cc8a1a5c6a17bb3b5e909750d5d0d2.jpg
855ca52773d91106a28fddf50ebb6a4f.jpg

8faac8cb17806b2b21ee38740e0a4fc7.jpeg


Sent from my iPhone using Tapatalk

  • Like 3
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

Welcome to NPORA Forums

 

Please register to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.

 

-NPORA

×
×
  • Create New...