'90 terrano side glass rubbers

[shanee11]

hi all,

looking for ideas on replacing the rubber/ plastic side glass seals.

these have shrunk over time and become brittle.

i doubt if nissan would have any and the price would be scarey.

what have others used ??? i have looked for pinch moulding without success.

any ideas will be appreciated.

thanks , shane..  

[msavides]

I used 3m marine grade adheasive and filled in where it shrunk. once dried I trimmed it to match the molding where it shrunk with a razer blade. looks good and cant really tell

[adamzan]

Pics?

[Cuong Nguyen]

I used 3m marine grade adheasive and filled in where it shrunk. once dried I trimmed it to match the molding where it shrunk with a razer blade. looks good and cant really tell

I used gasket sealant to fill in the gaps. Now the gap is larger lol. Ebay has the window moulding for hardbodies which work

Sent from my SAMSUNG-SM-N920A using Tapatalk

[msavides]

the 3m stuff is really good and does not shrink. it is used for sealing up boats. not all stuff is created equal. 

 

I have done the 1994 but not the 1991 yet.  

 

the plastic trim on both started to warp out away from the chanel. I used a heat gun to heat it up and shape it back into the channel. Then used the 3m adheasive to fill the gaps. 

 

I will snap some pics when I get a Chance.

 

BTW  when I got the 1994 the previous owner put about 2 inches of clear silicone all the way around the glass. It looked like crap

Edited March 19, 2019 by msavides