clearmusik Posted August 13, 2018 Share Posted August 13, 2018 I am installing a new transmission in my r50. The new transmission was pulled from an xterra and when it was pulled they cut the wires going inside the transmission. I am concerned about wheather or not splicing my old trans harness to the new trans will affect the function of solenoid due to any change that may occur in resistance due to the splice. Surely someone else has had a similar issue. Any thoughts or opinions? Waiting to put my trans in until I know what I should do? Link to comment Share on other sites More sharing options...
Slartibartfast Posted August 14, 2018 Share Posted August 14, 2018 If the splices are done properly, the rest of the circuit shouldn't even know they're there. Make sure you waterproof them. I use shrink wrap that's got some sort of hot glue stuff inside that melts and seals the joint when you shrink the tubing. 2 Link to comment Share on other sites More sharing options...
onespiritbrain Posted August 14, 2018 Share Posted August 14, 2018 +1 on the waterproof heat shrink. Also consider soldering the joints.Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
clearmusik Posted August 14, 2018 Author Share Posted August 14, 2018 I ordered some solder shrink wrap connectors, hopefully that will work Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now