Jump to content

96 SE Fixer upper


Mrelcocko
 Share

Recommended Posts

What product did you use for the undercoating?
I also used a few different sizes of wire brushes, wheels etc to knock off any surface rust along with some rustoleum self etching primer before the undercoating process. You really don't have to use the self etching primer I did just for piece of mind.

Mr Cox 96R50-97JR50

  • Like 2
Link to comment
Share on other sites

Mrelcocko, I still have my 97 pathfinder 4x4 if you are interested. She is in great shape for her age. It only has 70,000 miles and runs like a new one. I am trying to get 2500. Let me know if you have any interest. Thanks.

Link to comment
Share on other sites

Mrelcocko, I still have my 97 pathfinder 4x4 if you are interested. She is in great shape for her age. It only has 70,000 miles and runs like a new one. I am trying to get 2500. Let me know if you have any interest. Thanks.
Will do brother. Got any pics you could send me?

Mr Cox 96R50-97JR50

Link to comment
Share on other sites

  • 2 months later...

Got my HID'S in today now the long install process is just around the corner. #r50obsessed #96pathfinderse4777be74e296c031870c0ad930853b9f.jpg

Sent from my SM-S737TL using Tapatalk

  • Like 3
Link to comment
Share on other sites

On 3/8/2019 at 4:00 PM, Mrelcocko said:

 

Got my HID'S in today now the long install process is just around the corner. #r50obsessed #96pathfinderse
 

 

I am definitely interested in the instal process. I've had a set of these sitting in my garage for months now and haven't gotten around to figuring out how to wire them up yet

  • Like 2
Link to comment
Share on other sites

No problem bro I will definitely help you wire yours up. I done a quick install on these because my wife drives this one and I wanted her to be able to tell a difference when she drives to work tonight. The halogen lamps that came on this thing as you know are terrible it's so hard to see at night so she's going to think she's in a new vehicle I'm sure. On my QX4 the HIDs on it I wired them up to factory specs using the factory diagram. It calls for 4 diodes to be wired in I will get into that later when I walk you through everything. So just for tonight she's only going to have the low beam HIDs. I started at 9 this morning and just now wrapping things up but I had a lot of down time because I had it to deal with my puppies. I really enjoy this so much. I played music for 15 years and that was a great feeling no doubt but to be honest with you this feeling is 10 times better in my opinion anyway let me know when you want to go over things and I'll help you@micahfelker e887328e741dbf1b5519a8941b98e7c0.jpgc65d9fe4f6e15133ed774036975ca0ec.jpg27772133e1b019d876d5d46509a734ce.jpg19293b6f43073bd278f3c51fbcc3efbe.jpg11eaa62e0790bf5d5edd712503b5727b.jpg214bc13d419c6dad82b5bd30ff6f907f.jpg9c75536093819634f314f5d6b35ef5ed.jpgc70432d83ba77cadbf50aba09e8f4b6e.jpgd77f1d4b04249017e4e34845a0104d20.jpg

 

Sent from my SM-G530T using Tapatalk

 

 

 

 

 

 

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Working on wiring the aiming motors up. Done making wiring harness now wiring switch into the newly made harness and adding power. Having the diagram sure helps without a doubt. #r50obsessed c93d54ce2ded973118e8627ed175c7ab.jpg396203527dfa934e4636923754158be9.jpgf3a1073f18259ee1721cfbe70c0d4c51.jpg4856c27044b847e419a33ea544b4697e.jpg2ce3868d80197b02500560e64c1dc8e8.jpg

Sent from my SM-S737TL using Tapatalk

  • Like 2
Link to comment
Share on other sites

  • 5 months later...

Today at noon I have to have my Pathfinder up at Ted Russell Nissan in Knoxville for them to check out my seat belts and get them replaced. I'm pretty sure they're going to have to order them but nevertheless it's going to get done. I had to talk to Nissan consumer affairs and get them to re archive my VIN after thry archive it, it takes 24 hours before it starts pulling up in the system at the dealership. It's so they can set me up an appointment order the parts they need to order it's my wife's vehicle her daily driver so she's excited as can be. Kudos to Nissan for taking care of their customers especially on vehicles that are over 20 years old and as long as this one is on the road if I ever need the seat belt replaced in the future it'll be done for free77f116fdfc692ece1019c668bb6cb3df.jpg

Sent from my SM-S737TL using Tapatalk

Link to comment
Share on other sites

  • 2 weeks later...
So what condition does the seat belt have to be in for them to agree to fix it?
From my experience the seatbelts didnt retract. If i bent over to pick something up in passenger side floorboard they wouldn't come back to normal position when i sat back up. So they deemed them unsafe and replaced both fronts.

Sent from my SM-S737TL using Tapatalk

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

Put a new dizz in from Pull-A Part. Had to advanced the time just a tad and without no doubt this old gal is running better than she's ever ran. Everything is working like it should, the a/c will freeze you out brrrrrrrrrrrrr. Gotta get the sunroof operational and new paint. Getting the wifey a Maxima the first of the year so between the Q and Pathy one of them will be getting some rest.e6b30414d6dee0d38039948964b0eb91.jpg

Sent from my SM-S367VL using Tapatalk

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...