Jump to content

Connection box on positive terminal cable


Charlie_Brown
 Share

Recommended Posts

It is literally the connection box that connects to the positive terminal right at the battery. I took it off and apart and it's not a disable link it's just a connection for anyone else who may want to know. Ended up a wire pulled away from the connector so just the insulation was connected in my case.

Link to comment
Share on other sites

The BLACK section is just a connection point to the main terminal. The fusible links are the red and green wires AFTER the black box. If you notice, there's a second connection at the other end of said red and green wires.

 

Edit: here's the fusible link from said connection.

 

Sent from my SM-G920V using Tapatalk

224a91e27821d8815a41a664eb35a9af.jpg

Edited by RCWD21
  • Like 2
Link to comment
Share on other sites

If you do decide to alter the connection right there keep the fusible links as close to stock length as possible. They're a certain length designed to give at a certain load just like a regular fuse would but if they get too short then the regular load pulled by the system will be too much essentially turning it into a smaller amperage fuse.

 

Sent from my SM-G920V using Tapatalk

Edited by RCWD21
  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...