rc_cola_j Posted January 22, 2018 Share Posted January 22, 2018 Hey all! For those who have lifted their rigs, did you adjust your LSV? All I have been able to find online is that the spring is to he 7.64inches eye to eye when the vehicle is on flat ground and empty. However, when I adjust the bracket to this spec, the LSV is fully engaged (as though I’m carrying a heavy load. Can anyone steer me in the right direction? Also, where is the port for bleeding the LSV? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
colinnwn Posted January 22, 2018 Share Posted January 22, 2018 I have a 2 inch spring lift. I didn't adjust my LSV. I've been happy with my braking both empty and towing. Sent from my SM-N950U using Tapatalk Link to comment Share on other sites More sharing options...
rc_cola_j Posted January 22, 2018 Author Share Posted January 22, 2018 I have a 2 inch spring lift. I didn't adjust my LSV. I've been happy with my braking both empty and towing. Sent from my SM-N950U using Tapatalk Just feels like the rear is doing nothing at the moment. Perhaps I’m just being a little obsessive about it, but I’d like to get it in spec. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Snowboarder12345 Posted January 23, 2018 Share Posted January 23, 2018 I unhooked mine completely, with the 6 inch lift and the lsv hooked up the braking power was down significantly. Brakes felt good on my quick tool around a couple weeks as far as I could tell, but in the future I'd like to buy an aftermarket one that can be adjusted manually. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now