Jump to content

D21 Parking Brake Installation into WD21


OH6PILOT
 Share

Recommended Posts

Well, I've gone and done it. As part of the new motor installation into the Black Pathy, I decided to do a NUMBER of upgrades, which include 3" suspension lift, wider center console WITH CUP HOLDERS, and removed the WD21 Parking brake and installed a D21 Brake. SUCCESS!!!

 

$20 on ebay for the Brake Handle assembly, and $23 for the brake cable (NEW) online. I could have gotten the brake cable at the JY for $5.00, but I didn't want to screw around with an old cable, plus the BS of trying to remove it with an engine installed...

 

I've read on here a number of people asking about it, but haven;t seen much in regards to people who have actually done it, so...here you go!! Total Time for installation, roughly an hour and a half.

 

 

INSTALLED.

QWQuYGd.jpg

 

 

Engine Firewall Brake Cable Access Plate Removed

X2hAqL3.jpg

 

 

Inside View Of Mounting Hole (Lower) The funner spacer thing STAYS.

2rpTVQH.jpg

 

 

Upper Mount Bolt Plate (Remove Bolt and Zip Tie Wire Bundle Higher

zybnuj7.jpg

 

 

Installation Direction (Yes, looks weird) This isn't an easy fit, and it's a bitch when you're barrel chested trying to fit under the steering wheel.

CvJemB4.jpg

 

 

eBake Bracket in place

zCkHHNb.jpg

 

 

Upper Mount Bolts Installed

IoJjckz.jpg

 

 

 

 

 

 

 

 

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...