NovaPath Posted July 23, 2017 Share Posted July 23, 2017 Realized that I have a blown passenger motor mount. The ONLY way I can see myself getting under this thing to fix it is if I can upgrade some stuff along the way . Being that I have to drop the stinkin subframe down to replace this anyways, is anyone still making a subframe drop kit? Thanks in advance! Link to comment Share on other sites More sharing options...
mjotrainbrain Posted July 24, 2017 Share Posted July 24, 2017 Johann is. It'll be easiest to contact him on Facebook. IIRC he was asking about $750 for everything. Link to comment Share on other sites More sharing options...
mjotrainbrain Posted July 25, 2017 Share Posted July 25, 2017 https://www.facebook.com/groups/R50.Pathfinders/permalink/1548464331882373/ 1 Link to comment Share on other sites More sharing options...
Cornpone99 Posted July 27, 2017 Share Posted July 27, 2017 I think he had a sale $650 for a limited time Link to comment Share on other sites More sharing options...
johann_peralta Posted July 28, 2017 Share Posted July 28, 2017 I am, Message me or email me or Facebook me. glad to give you a rundown of the kits. 1 Link to comment Share on other sites More sharing options...
johann_peralta Posted July 28, 2017 Share Posted July 28, 2017 2 Link to comment Share on other sites More sharing options...
Deadpool Posted July 16, 2018 Share Posted July 16, 2018 On 7/28/2017 at 11:46 AM, johann_peralta said: Do you have how too install this setup Link to comment Share on other sites More sharing options...
XPLORx4 Posted July 16, 2018 Share Posted July 16, 2018 (edited) 1) Raise chassis off ground and support with jack stands 2) Remove wheels 3) Remove struts 4) Remove front differential assembly 5) Lock steering wheel; remove steering U-joint from rack 6) Remove bracket securing P/S hose to subframe 7) Support subframe with a floor jack 8) Support engine with a floor jack (with a 2x4 or 4x4 placed between oil pan and jack) 9) Remove bolts securing subframe 10) Remove nuts on motor mounts 11) Lower the subframe about 5" 12) Insert spacer blocks between motor mounts and subframe 13) Insert spacer blocks between chassis and subframe 14) Install and tighten all of the hardware to secure the spacers to the chassis and to the subframe 15) Install "missing link" brace between left and right lower control arms 16) Attach strut spacers onto struts 17) Reinstall struts 18) Install new steering shaft/u-joints 19) Remove floor jacks 20) Reinstall front differential 21) Reinstall wheels 22) Now go lift the rear suspension. Edited July 16, 2018 by XPLORx4 Link to comment Share on other sites More sharing options...
Slartibartfast Posted July 16, 2018 Share Posted July 16, 2018 On 7/28/2017 at 8:46 AM, johann_peralta said: Is that rebar? Link to comment Share on other sites More sharing options...
johann_peralta Posted July 16, 2018 Share Posted July 16, 2018 Yes, makes a good support for the missing link. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now