fleurys Posted June 30, 2016 Share Posted June 30, 2016 (edited) Hi Everyone. Unfortunately, 4 x 4 d e s i g n is stopping its operations. I am taking a few months off in order to prepare for a bigger and better Version 2... I will not sell any inventory left so please do not write me about this. I would like to thank everyone for the great adventure that it was. Stay tuned for chapter 2 S. ps. I will stay around to help like I always did. Edited July 1, 2016 by fleurys 1 Link to comment Share on other sites More sharing options...
bushnut Posted July 1, 2016 Share Posted July 1, 2016 Say it ain't so man....but I can't wait to see what you'll have to offer. I'm sure it will be cool, innovative and well built. bon chance mon ami. 2 Link to comment Share on other sites More sharing options...
adamzan Posted July 1, 2016 Share Posted July 1, 2016 Hope everything is well Steve, I need to come see ya sometime. 1 Link to comment Share on other sites More sharing options...
Rebelord Posted July 2, 2016 Share Posted July 2, 2016 Everything alright? Or went so well building a bigger & better shop!! Which would be awesome. Link to comment Share on other sites More sharing options...
fleurys Posted July 2, 2016 Author Share Posted July 2, 2016 everything is cool... building a bigger and better shop... Link to comment Share on other sites More sharing options...
Zero Posted July 2, 2016 Share Posted July 2, 2016 Are you simply shutting down for a bit to move abs then going to reopen with a new line, or are you done with pathfinders? Sent from my HTC Desire 626s using Tapatalk 1 Link to comment Share on other sites More sharing options...
fleurys Posted July 2, 2016 Author Share Posted July 2, 2016 Not done with pathfinders...far from it. 5 Link to comment Share on other sites More sharing options...
Zero Posted July 2, 2016 Share Posted July 2, 2016 Perfect. Sent from my HTC Desire 626s using Tapatalk Link to comment Share on other sites More sharing options...
Precise1 Posted July 4, 2016 Share Posted July 4, 2016 It should be interesting to see what capabilities/products you evolve to... As always, good luck and I'll help if I can. B Link to comment Share on other sites More sharing options...
DarekG Posted July 6, 2016 Share Posted July 6, 2016 Can't wait to see what you come up with for version two! Are you going to be expanding your line of R50 products? 1 Link to comment Share on other sites More sharing options...
fleurys Posted July 9, 2016 Author Share Posted July 9, 2016 It should be interesting to see what capabilities/products you evolve to... As always, good luck and I'll help if I can. B Thanks b. Cheers Link to comment Share on other sites More sharing options...
fleurys Posted July 9, 2016 Author Share Posted July 9, 2016 Can't wait to see what you come up with for version two! Are you going to be expanding your line of R50 products? Yes. But first i need to finalize my garage in order to bring those. Bullet proof trailing arms, full skids and tougher half shafts are some of my immediate ideas i will be working on... Cheers 3 Link to comment Share on other sites More sharing options...
pathfinder1990 Posted July 10, 2016 Share Posted July 10, 2016 Now that your spacers are unavailable is there someone else you could recommend Link to comment Share on other sites More sharing options...
fleurys Posted July 10, 2016 Author Share Posted July 10, 2016 not really sorry... Link to comment Share on other sites More sharing options...
SpecialWarr Posted July 10, 2016 Share Posted July 10, 2016 If you need a hand moving machines over a weekend or two drop me a line I'll be happy to give you a hand! Sent from my Samsung LTE Link to comment Share on other sites More sharing options...
k9sar Posted July 11, 2016 Share Posted July 11, 2016 Just got an 05 if you want to send anything down here to the states for fit or reliability testing on an R51. Gonna need some window-bling too so get that new shop up and running soon Link to comment Share on other sites More sharing options...
fleurys Posted July 13, 2016 Author Share Posted July 13, 2016 Just got an 05 if you want to send anything down here to the states for fit or reliability testing on an R51. Gonna need some window-bling too so get that new shop up and running soon working on it... Link to comment Share on other sites More sharing options...
rc_cola_j Posted August 8, 2016 Share Posted August 8, 2016 Yes. But first i need to finalize my garage in order to bring those. Bullet proof trailing arms, full skids and tougher half shafts are some of my immediate ideas i will be working on... Cheers Fleury.....what's your ETA for getting back up and running? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
fleurys Posted August 8, 2016 Author Share Posted August 8, 2016 October/November 2016 1 Link to comment Share on other sites More sharing options...
rc_cola_j Posted August 9, 2016 Share Posted August 9, 2016 October/November 2016 I will eagerly await! Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
LittleFR Posted August 14, 2016 Share Posted August 14, 2016 I was rather dissapointed after your many helpful posts to not be able to purchase your products. Your advice and knowledge of the R50 platform and it's limits essentially built my truck as it sits. Hopefully when things return to normal and your website is up again I can purchase a product or two from you. In the mean time I look forward to gleaning more information. Link to comment Share on other sites More sharing options...
fleurys Posted September 5, 2016 Author Share Posted September 5, 2016 I was rather dissapointed after your many helpful posts to not be able to purchase your products. Your advice and knowledge of the R50 platform and it's limits essentially built my truck as it sits. Hopefully when things return to normal and your website is up again I can purchase a product or two from you. In the mean time I look forward to gleaning more information. I will get back.. I really just need the time to refocus and actually finish some of the projects that have been taking way too long.. (like my new garage with a lift that will enable me to finally finish the full skidplates) even in winter time.. Link to comment Share on other sites More sharing options...
bob82pigdog Posted September 7, 2016 Share Posted September 7, 2016 D'oh! Facepalm, facepalm, facepalm! After lurking and waiting for the right time to refresh my suspension, I'm finally ready, and dang, now I can't get them. I was frantically searching the Google device for your website so I could finally order some spacers which brought me to this thread. I totally get taking some time to finish projects and I'm rooting for you to get back up and running. I definitely appreciate your work, and helpful posts. I can wait a few months (I hope!) to get the spacers, and heck, if you've got full skids available then, I may just order some of those at the same time. 1 Link to comment Share on other sites More sharing options...
rc_cola_j Posted October 8, 2016 Share Posted October 8, 2016 D'oh! Facepalm, facepalm, facepalm! After lurking and waiting for the right time to refresh my suspension, I'm finally ready, and dang, now I can't get them. I was frantically searching the Google device for your website so I could finally order some spacers which brought me to this thread. I totally get taking some time to finish projects and I'm rooting for you to get back up and running. I definitely appreciate your work, and helpful posts. I can wait a few months (I hope!) to get the spacers, and heck, if you've got full skids available then, I may just order some of those at the same time. Hey Fleury, I too am ready to do some suspension upgrade and am eagerly holding off until you are back up and running. I'm more than happy waiting......just curious if you have an updated ETA? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
fleurys Posted October 8, 2016 Author Share Posted October 8, 2016 Should be up around end of october...latest mid-november.... but I am shooting for end of october. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now