Jump to content

Favorite DIY bedliner product


AndyC
 Share

Recommended Posts

Had to do some cutting and grinding to clearance for new tires. I want to seal up the bare metal in primer, then cover it and a small area outside the fenders in bedliner. Anyone have any experience with the rustoleum, duplicolor, hurculiner... One better than the other?? Thanks!

Link to comment
Share on other sites

Check out Monsta Liner. They have different colors. Their Web site shows off people who have done the entire outside of the vehicle. Once my paint gets bad, it's getting there, I'm planning a Monsta Liner make over.

Link to comment
Share on other sites

I believe I used rustoleum bedliner on mine, it did an ok job, but tends to flake off if much pressure or rocks hit it. I would say that if you found a primer that bonds to the plastic a bit, then you'd have better results. I would suggest taking the liners off for full coverage, and remember to tape off the areas where the pins install, as gumming them up might not bode well.

Link to comment
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...