iPath Posted March 3, 2015 Share Posted March 3, 2015 I took my Pathy into Autozone for a diagnostic and I got the codes: P0442: evap control system- small leak detected, P0171: Fuel system lean bank 1, and P1490: vacuum cut valve bypass valve (circuit) Anything I should be deathly afraid of and have it serviced ASAP? Thanks in advance guys. Link to comment Share on other sites More sharing options...
Rebelord Posted March 3, 2015 Share Posted March 3, 2015 Have you downloaded the FSM for your truck? It will help in diagnosing those. Almost sounds like you may have a vacuum leak. But I'll take a look in a few. Link to comment Share on other sites More sharing options...
Rebelord Posted March 3, 2015 Share Posted March 3, 2015 In the FSM EC-267 starts the procedure for your P1490 Vacuum Cut Valve Diagnostics. Looks pretty easy to do. Baring where the sensor is located and actually getting to it. The P0442 is probably directly related to that code. I would figure out the P1490 and see if once you fix that and clear codes. That it stays away. For your lean condition, start in EC-273. Simple things to check are intake leaks etc. But, could also be correlated to your Vacuum issue. Link to comment Share on other sites More sharing options...
Precise1 Posted March 3, 2015 Share Posted March 3, 2015 I am certain this has been discussed in another thread as well, I believe our resident Nissan mechanic outlined the troubleshooting and repairs... B Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now