Jump to content
Sign in to follow this  
DsR50

new heads for my 93 have a different style distributor, need help

Recommended Posts

Ok so I pulled the heads from another pathfinder but am unsure of the year but I'm pretty sure it was in the 90-95. I've already installed them and just found that the way the distributor mounting is a little different. I can make a little bracket to make it work but I want to know if I might be missing a bracket from the donor or if I might be missing a bracket from the donor or if that distributor from the donor would work on my 93

Share this post


Link to post
Share on other sites

bump

 

Share this post


Link to post
Share on other sites

I don't know anything about distributor differences in WD21s. Pics?

Share this post


Link to post
Share on other sites

There's a plate that bolts to the head (2 bolts iirc) that the distributor actually bolts to and has the correct angle for the distributor mout (mpfi and TBI have different distributors and use different mounting plates, I had to change mine when I swapped from TBI to mpfi style). Do you have this plate? I'll look to see if I have a pic of one (I know I have spares somewhere from pulling enough spare dizzys)

Share this post


Link to post
Share on other sites

This guy is exactly correct ^.

 

you need to swap the distributor block from your old head over.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

Welcome to NPORA Forums

 

Please REGISTER to gain full access to the forum.

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.

 

-NPORA

×
×
  • Create New...