Jump to content

Pepsi's for sale!


new4x4r
 Share

Recommended Posts

Well its time to sell my beloved Pepsi! I love the way she performs/runs/drives/looks but things are starting to rust out and I'm gonna need a vehicle to last me the next 10 years or so. So I figured this winter I'd let it go and find something else to suit my needs. So here goes! I obviously want to sell certain items as a whole, rather then separate them. You need them to accomplish what I have. For instance, all the SAS items need to be used in conjunction with each other to work, axle, steering, rad/fan, etc.

So pricing will reflect that. ALSO, It would be best if someone bought the whole truck and swapped everything over, cause all the measurements are done for you... The truck itself is *getting* rough. So you may not want to use it as your main vehicle. So here's the list:

Complete truck - 1998 Nissan Pathfinder SAS (LE) 230 k, auto, tow pkge, leather, burlwood, power everything, etc. - $8500 CDN

SAS:

Dana 44 '84 Jeep Grand Wagoneer

4.88 Yukon Gears

Yukon Master bearings/seals

Spartan Locker

Outer C's gusseted

TMR diff. Cover

Newish Ujoints/bearings/seals

Warn Premium Manual hubs

Tom woods high angle/long slip drive shaft

King 2.0 emulsion coilovers 14" 300/250

 

Staang's fab long arms w/ coil mounts

Transmission crossmember

Staang's Fab HD steering links

'98 Dodge Durango Steering box

E-Fan

Monte Carlo 4 Core metal radiator

Chevy 1 ton master cylinder

Chevy sealed high Amp alternator

 

Rear Axle:

Dana 44 2001 Isuzu Rodeo

4.88 Yukon Gears

Spartan locker

Timken bearings

Independent 4x standard cut conversion

Newish brakes

Custom Radius arms

- 2" square 1/4" wall

- poly bush/johnny joint

Iron rock offroad WJ 6" lift springs

Procomp 14" travel 9000's

TransAxle Drive shaft

 

Custom Rock sliders

Custom Snorkel

Custom front winch bumper

Customs rear tube bumper

And POSSIBLY....

Custom 15x9.5 beadlocks w/

36x13.5x15 Irok radials

 

Email me for prices rhadath@gmail.com

Link to comment
Share on other sites

Not sure what specs you want. Its a 14" electric fan. Got it from Napa Auto parts. The Rad is a Spectra Premium CU571. It fits in between your upper and lower rad support and I'd send all the hoses as well.

Link to comment
Share on other sites

  • 1 month later...

Alright, I'm Stripping the truck down.

$2500 for the SAS and all that goes along with it

$1500 for Rear Dana 44 set-up

$700 Front and Rear Bumpers

$200 Chevy Master Set-up

 

I can't remember what else I have for sale... Go through my build thread and let me know if ya see something you want

 

http://www.pirate4x4.com/forum/nissan/1116165-1998-nissan-pathfinder-r50-sas.html

Link to comment
Share on other sites

I'd be heavily interested in the sas set up for my hardbody, but that would be in a couple month... I highly doubt it will be around... Plus shipping might be a bit much, where are you located?

Link to comment
Share on other sites

Oh snap, that would be a fair deal in shipping to Vancouver... But like you said you never know maybe the price would drop too ;) but you got almost the exact set up I want, rodeo d44 locked with manual hubs, coil overs and even the gears I want to run. Is it set up for high steer too?

Edited by cvdloc
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...