new4x4r Posted October 13, 2013 Share Posted October 13, 2013 Well its time to sell my beloved Pepsi! I love the way she performs/runs/drives/looks but things are starting to rust out and I'm gonna need a vehicle to last me the next 10 years or so. So I figured this winter I'd let it go and find something else to suit my needs. So here goes! I obviously want to sell certain items as a whole, rather then separate them. You need them to accomplish what I have. For instance, all the SAS items need to be used in conjunction with each other to work, axle, steering, rad/fan, etc. So pricing will reflect that. ALSO, It would be best if someone bought the whole truck and swapped everything over, cause all the measurements are done for you... The truck itself is *getting* rough. So you may not want to use it as your main vehicle. So here's the list: Complete truck - 1998 Nissan Pathfinder SAS (LE) 230 k, auto, tow pkge, leather, burlwood, power everything, etc. - $8500 CDN SAS: Dana 44 '84 Jeep Grand Wagoneer 4.88 Yukon Gears Yukon Master bearings/seals Spartan Locker Outer C's gusseted TMR diff. Cover Newish Ujoints/bearings/seals Warn Premium Manual hubs Tom woods high angle/long slip drive shaft King 2.0 emulsion coilovers 14" 300/250 Staang's fab long arms w/ coil mounts Transmission crossmember Staang's Fab HD steering links '98 Dodge Durango Steering box E-Fan Monte Carlo 4 Core metal radiator Chevy 1 ton master cylinder Chevy sealed high Amp alternator Rear Axle: Dana 44 2001 Isuzu Rodeo 4.88 Yukon Gears Spartan locker Timken bearings Independent 4x standard cut conversion Newish brakes Custom Radius arms - 2" square 1/4" wall - poly bush/johnny joint Iron rock offroad WJ 6" lift springs Procomp 14" travel 9000's TransAxle Drive shaft Custom Rock sliders Custom Snorkel Custom front winch bumper Customs rear tube bumper And POSSIBLY.... Custom 15x9.5 beadlocks w/ 36x13.5x15 Irok radials Email me for prices rhadath@gmail.com Link to comment Share on other sites More sharing options...
ferrariowner123 Posted October 13, 2013 Share Posted October 13, 2013 Specs and price on E fan and radiator setup? Thanks Sorry your leaving the pathy game. Your rig was awesome to see around here. -Kyle Link to comment Share on other sites More sharing options...
new4x4r Posted October 13, 2013 Author Share Posted October 13, 2013 Not sure what specs you want. Its a 14" electric fan. Got it from Napa Auto parts. The Rad is a Spectra Premium CU571. It fits in between your upper and lower rad support and I'd send all the hoses as well. Link to comment Share on other sites More sharing options...
01silvapathy Posted October 15, 2013 Share Posted October 15, 2013 If you part out let me know about the front sas components Link to comment Share on other sites More sharing options...
new4x4r Posted October 15, 2013 Author Share Posted October 15, 2013 It will be a full part out. Although it would be smart of someone to just take the truck and swap the parts over, odds are people don't want to do exactly what I've done. Link to comment Share on other sites More sharing options...
01silvapathy Posted October 17, 2013 Share Posted October 17, 2013 PM me a price for the front control arms crossmember steering box ect. 1 Link to comment Share on other sites More sharing options...
new4x4r Posted November 27, 2013 Author Share Posted November 27, 2013 Alright, I'm Stripping the truck down. $2500 for the SAS and all that goes along with it $1500 for Rear Dana 44 set-up $700 Front and Rear Bumpers $200 Chevy Master Set-up I can't remember what else I have for sale... Go through my build thread and let me know if ya see something you want http://www.pirate4x4.com/forum/nissan/1116165-1998-nissan-pathfinder-r50-sas.html Link to comment Share on other sites More sharing options...
cvdloc Posted November 27, 2013 Share Posted November 27, 2013 I'd be heavily interested in the sas set up for my hardbody, but that would be in a couple month... I highly doubt it will be around... Plus shipping might be a bit much, where are you located? Link to comment Share on other sites More sharing options...
new4x4r Posted November 27, 2013 Author Share Posted November 27, 2013 I'm in Ontario. Message me when you're ready. You never know Link to comment Share on other sites More sharing options...
cvdloc Posted November 27, 2013 Share Posted November 27, 2013 (edited) Oh snap, that would be a fair deal in shipping to Vancouver... But like you said you never know maybe the price would drop too but you got almost the exact set up I want, rodeo d44 locked with manual hubs, coil overs and even the gears I want to run. Is it set up for high steer too? Edited November 27, 2013 by cvdloc Link to comment Share on other sites More sharing options...
new4x4r Posted November 27, 2013 Author Share Posted November 27, 2013 No high steer... But I have 7/8 hiems and 1 1/2 DOM tube. You can drive on the steering without f$#king it up Link to comment Share on other sites More sharing options...
cvdloc Posted November 27, 2013 Share Posted November 27, 2013 It works. Anyways we will see, although it's a very nice set up Link to comment Share on other sites More sharing options...
TheAustinHenry Posted November 29, 2013 Share Posted November 29, 2013 Just read through the build thread, awesome truck, hope it goes to a loving buyer! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now