chowpong Posted May 28, 2013 Share Posted May 28, 2013 Hi guys, does anyone here upgraded your headlight to Angel/Devil eyes with HIID? Is this possible for a non clear type lens? Please help me on these guys if there is one who already tried. Can you post pics and also a tutorial? Im planning to buy this: //www.sulit.com.ph/index.php/view+classifieds/id/13001529/HID+DEVIL+EYES+Projector+LENSE+-Hi/Lo+Kit+NISSAN+TERRANO+55W?referralKeywords=terrano&event=Search+Ranking,Position,1-4,4#advertisementDetails Thank You. Link to comment Share on other sites More sharing options...
gv280z Posted May 28, 2013 Share Posted May 28, 2013 http://www.nissanpathfinders.net/forum/topic/31473-hid-projectors-installed-w-pics/?hl=%20red%20%20lights I remembered seeing this so thought I'd just post it up for you. I gotta say though, this guy REALLY wanted this project to go through, I don't think I would have had the stones to pull it off. This wasn't just some simple remove and replace job. Link to comment Share on other sites More sharing options...
Pav Posted May 28, 2013 Share Posted May 28, 2013 If that is the model of truck you have it should be no problem. After checking the link I don't think those lights are going to work with the specs you have posted about your truck in your profile. You can make your own...something I'm contemplating doing since my brother has made them before...you simply buy the parts and put it together. If you want to have something already fabricated then there are some really impressive LED lights that you can get but you would need to change your front grill with that of a hardbody pickup to house them. Link to comment Share on other sites More sharing options...
edicer2 Posted May 31, 2013 Share Posted May 31, 2013 (edited) Hey those are pretty easy to install i did it on my 92 pathfinder. I had to make my headlights bigger though which caused them to stick out(alot of people didnt like that) i have since made some for my 300zx using the same projectors and it came out better. had to cut the back of the housing to sink the projector back and then was able to use a few washers as a platform This is the running lights....when the headlights come on the halo stays on but the blue turns off and is just the the HID take in the fact its day light out and the garage lights are on right now ...pretty damn bright yet and decent cut off line. Edited May 31, 2013 by edicer2 Link to comment Share on other sites More sharing options...
chowpong Posted June 8, 2013 Author Share Posted June 8, 2013 Hi Guys, Thank You so much all of you..I Mean it, like edicer i want to pursue this project. So now i will go and search over ebay & amazon if they have a stock of clear type lens and angel eyes with hid kit for my 1992 Nissan Terrano. Gonna withdraw some money for this project. I'm excited to do this! My only problem is the shipping from u.s to the philippines, it will be a bloody price for me..lol Link to comment Share on other sites More sharing options...
chowpong Posted June 8, 2013 Author Share Posted June 8, 2013 Guys, One last question. I saw this Headlight on the internet. Is this possible for HID KIT with ANGEL EYES Conversion like what edicer did? Will wait for your response before buying this. Or if you have a link for a clear type headlights much appreciated. Thank You Guys! http://www.jcwhitney.com/headlight-conversion-kits/p2017929.jcwx?skuId=1217193&filterid=c2821d1685u0j1 Link to comment Share on other sites More sharing options...
edicer2 Posted June 8, 2013 Share Posted June 8, 2013 This is what i bought for my 92 pathfinderhttp://www.ebay.com/itm/87-95-PATHFINDER-HARDBODY-HEADLIGHTS-HEADLAMPS-CHROME-/190837578268?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3APathfinder&hash=item2c6ece5a1c&vxp=mtrand then this http://www.ebay.com/itm/3-Car-BI-Xenon-H1-H4-H7-Universal-HID-Projector-Lens-Kit-Angel-Eye-2-BALLAST-/160780332487?pt=Motors_Car_Truck_Parts_Accessories&hash=item256f412dc7&vxp=mtr you will need to modify the housing a bit for them to fit right. like i did in the pictures above. normally these would bolt in but our headlights arent deep enough so you need to cut the rear off and make a new mounting point...either way shouldnt take more than a few hours. to take the light apart put it in the oven for like 20 mins on 250 degrees and it should melt the glue if it doesnt then keep it in longer (make sure they are on a pan and not just sitting on the grates). Link to comment Share on other sites More sharing options...
djratlif Posted October 23, 2013 Share Posted October 23, 2013 I've been looking at doing the same type of upgrade to my lights, but I have a few questions. Do the HID kits have high and low beam still or does it only function on one setting? Also, anyone know if this is legal up here in NY? I want to avoid hitting a deer (or moose/bear/any other critter) like I did with my Frontier. My poor little truck barely made it without being totaled and don't wanna repeat scenario with this Nissan. Link to comment Share on other sites More sharing options...
Nefarious Posted October 31, 2013 Share Posted October 31, 2013 As long as the lights are 4300K coloured lamps they should be legal. Bi-xenon means high and low beam. Link to comment Share on other sites More sharing options...
Nissanland Posted October 31, 2013 Share Posted October 31, 2013 Before I got the truck from daughter she had the HID installed by a Nissan shop and all it has is one setting. I like the light BUT wish it had hi/low. The hi beam indicates on all the time also.. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now