Jump to content

Just found you guys !


tc2300s
 Share

Recommended Posts

Yes, alot. Can not load them in. I tried and read the instructions,.....Yet it said this file type not accepted. It is not much for looks but is very tough.

Edited by tc2300s
Link to comment
Share on other sites

WELCOME TO THE SITE !!

 

Upload your pics to tinypic, http://tinypic.com/

 

after you create a folder and upload the pics, when you click on each pic there will be section on the left that says "grab your code" with 4 codes under it, you just copy the code under where it says "MG Code for Forums & Message Boards" than paste it into your post here

 

where in Florida are you?

Edited by ahardb0dy
Link to comment
Share on other sites

It is all homemade. I just cut off the regular mounts and made some on top to hold the body. Maybe 8 inches or so. Has great suspension travel and air ride.

Link to comment
Share on other sites

oooh!! he has one of those clintometer thing's that some members on here are desperate to find !! LOL

 

do you regularly bottom out against that fixed bump stop? Looks like a good place for one of those Hydraulic Bumpstops

 

 

Is this a off road only truck?

Link to comment
Share on other sites

oooh!! he has one of those clintometer thing's that some members on here are desperate to find !! LOL

 

do you regularly bottom out against that fixed bump stop? Looks like a good place for one of those Hydraulic Bumpstops

 

 

Is this a off road only truck?

No Daily Driver

Link to comment
Share on other sites

oooh!! he has one of those clintometer thing's that some members on here are desperate to find !! LOL

 

do you regularly bottom out against that fixed bump stop? Looks like a good place for one of those Hydraulic Bumpstops

 

 

Is this a off road only truck?

It is from a 4-Runner old style.

Link to comment
Share on other sites

oooh!! he has one of those clintometer thing's that some members on here are desperate to find !! LOL

 

do you regularly bottom out against that fixed bump stop? It lifts or lowers.

Link to comment
Share on other sites

oooh!! he has one of those clintometer thing's that some members on here are desperate to find !! LOL

 

its the factory Nissan one peoples pants get shorter over man... Thats robbed from a different truck, just like his Toyota dash vents below it....

 

 

 

 

 

that looks abusable man :aok: the boost gauge actually connected to somethin? Whats between the fenders? give us some info on it!

Link to comment
Share on other sites

DD, guess it's good to live in Florida, we can get away with stuff like that. I know in most stated anything over a 3" body lift would be illegal. Where do you live?

It does not have a lift just moved the mounts ....That would be dangerous if you used spacers !!!

Edited by tc2300s
Link to comment
Share on other sites

its the factory Nissan one peoples pants get shorter over man... Thats robbed from a different truck, just like his Toyota dash vents below it....

 

Those are Nissan vents from a 1996.

 

 

 

that looks abusable man :aok: the boost gauge actually connected to somethin? Whats between the fenders? give us some info on it!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...