Harvey Posted August 25, 2009 Share Posted August 25, 2009 Hi All, I ordered some new door locks for my Pathy but I've noticed a couple of things... 1 - I need some plastic bits as it's the plastic bits of the door clock inside the door that closes next to the latch on the B pillar thats broken. So my question is - where do i get these plastic bits from? 2 - whilst I can figure out how to take of the cath that holds the lock barrell on the door, how do I actually detach the barrell from the rest of the mechanism? thanks all! Harv. Link to comment Share on other sites More sharing options...
Tungsten Posted August 25, 2009 Share Posted August 25, 2009 For the plastic bits, either make your own contraption thats similar to the plastic bits out of some copper wire, or go see the dealer. Link to comment Share on other sites More sharing options...
nunya Posted August 25, 2009 Share Posted August 25, 2009 Go to a junkyard with an empty pocket, leave with a couple plastic bits Link to comment Share on other sites More sharing options...
GrimGreg Posted August 26, 2009 Share Posted August 26, 2009 Depending on which bit, you can get a pack of generic ones for like $2 at the part store, I did that for a broken piece on my 93. When I had to replace parts on my 88, I used Nunya's method. Link to comment Share on other sites More sharing options...
beckylynn420 Posted August 28, 2009 Share Posted August 28, 2009 I know that O'Reilly has a pack of generic ones different sizes and such....only a couple bucks...you can try there. By chance is it the passenger side door? Just curious cause both of these ones we have neither passenger side door lock works properly....darn things! Thanks BH Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now