Jump to content


Moving To New Servers!
Members interested in helping test the new NPORA server platform, please contact RedPath88 via PM or email for further information.
 
Thank you,
-NPORA
 
 


Photo

GENUINE NISSAN PARTS


  • Please log in to reply
45 replies to this topic

#41 OFFLINE   Alkorahil

Alkorahil

    NPORA Old-Timer

  • Topic Starter
  • Vendors
  • Others: Members
  • PipPipPipPipPip
  • 3,103 posts
  • Local time: 09:59 PM
  • Location:Dallas/Plano, TX
  • Country:
  • Model:XE
  • Year:1995

Posted 12 March 2009 - 07:29 PM

i did not know these exist, are they good? what do they look like? short tube/long tube?



I will get the specs tommorrow from Nissan and let you know.

#42 OFFLINE   Alkorahil

Alkorahil

    NPORA Old-Timer

  • Topic Starter
  • Vendors
  • Others: Members
  • PipPipPipPipPip
  • 3,103 posts
  • Local time: 09:59 PM
  • Location:Dallas/Plano, TX
  • Country:
  • Model:XE
  • Year:1995

Posted 13 March 2009 - 12:58 PM

I will get the specs tommorrow from Nissan and let you know.



These were made by Doug Thorley for Nissan Motorsports.
The are chrome plated, short tube with 1 1/2 inch primaries.
They are for the WD21 and D21 VG30i up to production date 8/89

#43 OFFLINE   beastpath

beastpath

    NPORA Old-Timer

  • Members
  • PipPipPipPipPip
  • 1,820 posts
  • Local time: 07:59 PM
  • Location:Phoenix, Arizona
  • Model:SE
  • Year:1991

Posted 30 March 2009 - 07:23 PM

can you get OEM PCV hoses for less than $60? I looked on your website but they arent listed. Nissan dealership here wants about $60

#44 OFFLINE   Alkorahil

Alkorahil

    NPORA Old-Timer

  • Topic Starter
  • Vendors
  • Others: Members
  • PipPipPipPipPip
  • 3,103 posts
  • Local time: 09:59 PM
  • Location:Dallas/Plano, TX
  • Country:
  • Model:XE
  • Year:1995

Posted 31 March 2009 - 09:44 AM

can you get OEM PCV hoses for less than $60? I looked on your website but they arent listed. Nissan dealership here wants about $60



Are you wanting all five of them highlighted below?

Posted Image

#45 OFFLINE   beastpath

beastpath

    NPORA Old-Timer

  • Members
  • PipPipPipPipPip
  • 1,820 posts
  • Local time: 07:59 PM
  • Location:Phoenix, Arizona
  • Model:SE
  • Year:1991

Posted 31 March 2009 - 09:46 AM

nope just PN 11826 :D

#46 OFFLINE   Alkorahil

Alkorahil

    NPORA Old-Timer

  • Topic Starter
  • Vendors
  • Others: Members
  • PipPipPipPipPip
  • 3,103 posts
  • Local time: 09:59 PM
  • Location:Dallas/Plano, TX
  • Country:
  • Model:XE
  • Year:1995

Posted 31 March 2009 - 10:02 AM

$15.26 plus some $6-$8 for shipping fedex depending on Zip code.

I have heard many many times from customers that the dealers in AZ are expensive but they wanted $60for that one hose? WOW.
I can get you all five in that diagram for $71.00..............

Edited by Alkorahil, 31 March 2009 - 10:04 AM.


#47 OFFLINE   beastpath

beastpath

    NPORA Old-Timer

  • Members
  • PipPipPipPipPip
  • 1,820 posts
  • Local time: 07:59 PM
  • Location:Phoenix, Arizona
  • Model:SE
  • Year:1991

Posted 31 March 2009 - 10:08 AM

JEEZ-LOUISE!! thats so cheap! lol. I'll definately take that one, let me check and see the condition of the others too and ill get back to you.

Thanks man!

#48 OFFLINE   GRNMACHINE

GRNMACHINE

    NPORA Regular

  • Members
  • PipPip
  • 84 posts
  • Local time: 10:59 PM
  • Year:1999.5

Posted 07 April 2009 - 06:26 PM

Rob-I have a 99.5 Pathfinder SE 4x4. How much for the 3 belts?

Code Product Name
11720N Pathfinder BELT-FAN & ALTERNATOR
11920N Pathfinder BELT-COMPRESSOR
11950N Pathfinder BELT-POWER STEERING OIL PUMP

Thanks,
Rick

#49 OFFLINE   Alkorahil

Alkorahil

    NPORA Old-Timer

  • Topic Starter
  • Vendors
  • Others: Members
  • PipPipPipPipPip
  • 3,103 posts
  • Local time: 09:59 PM
  • Location:Dallas/Plano, TX
  • Country:
  • Model:XE
  • Year:1995

Posted 08 April 2009 - 01:09 PM

11720N Pathfinder BELT-FAN & ALTERNATOR $15.73
11920N Pathfinder BELT-COMPRESSOR $14.10
11950N Pathfinder BELT-POWER STEERING OIL PUMP $13.37

$43.20 FOR PARTS.
ABOUT $6-$8 FOR SHIPPING DEPENDING ON ZIP CODE.

Thanks,
Rob

#50 OFFLINE   bigred07

bigred07

    NPORA Fulltime Resident

  • Members
  • PipPipPipPip
  • 248 posts
  • Local time: 07:59 PM
  • Location:Hereford AZ
  • Model:SE Offroad
  • Year:1989

Posted 08 April 2009 - 02:22 PM

how much for two of the stock adjustable shocks for an 89 in the front? i've asked other places and they wanted like 200 each.

#51 OFFLINE   GRNMACHINE

GRNMACHINE

    NPORA Regular

  • Members
  • PipPip
  • 84 posts
  • Local time: 10:59 PM
  • Year:1999.5

Posted 08 April 2009 - 08:39 PM

Rob-I have a 99.5 Pathfinder SE 4x4. How much for the 3 belts?

Code Product Name
11720N Pathfinder BELT-FAN & ALTERNATOR
11920N Pathfinder BELT-COMPRESSOR
11950N Pathfinder BELT-POWER STEERING OIL PUMP

Thanks,
Rick



#52 OFFLINE   GRNMACHINE

GRNMACHINE

    NPORA Regular

  • Members
  • PipPip
  • 84 posts
  • Local time: 10:59 PM
  • Year:1999.5

Posted 09 April 2009 - 05:31 AM

Rob,

Thanks I will call you today and order if that is easiest? Also had a question about O-rings. I have never worked on A/C aside from adding refridgerant. Recently replaced the condensor & the drier/liquid tank. I am looking thru the 1999 FSM and it talks about O-rings. I do not recall O-rings being there when I replaced the parts. Should I R&R everything and install new )-rings before I get A/C recharged?

If so these are the part numbers listed from FSM for size 8:

New 92471 N8210
Former 92470 N8200

There is a diagram showing pics of the Former O-rings & New O-rings. Not sure which ones I need but if they are not expensive I should probably get 4 of each.

Thanks again,
Rick

#53 OFFLINE   Alkorahil

Alkorahil

    NPORA Old-Timer

  • Topic Starter
  • Vendors
  • Others: Members
  • PipPipPipPipPip
  • 3,103 posts
  • Local time: 09:59 PM
  • Location:Dallas/Plano, TX
  • Country:
  • Model:XE
  • Year:1995

Posted 09 April 2009 - 10:58 AM

Rob,

Thanks I will call you today and order if that is easiest? Also had a question about O-rings. I have never worked on A/C aside from adding refridgerant. Recently replaced the condensor & the drier/liquid tank. I am looking thru the 1999 FSM and it talks about O-rings. I do not recall O-rings being there when I replaced the parts. Should I R&R everything and install new )-rings before I get A/C recharged?

If so these are the part numbers listed from FSM for size 8:

New 92471 N8210
Former 92470 N8200

There is a diagram showing pics of the Former O-rings & New O-rings. Not sure which ones I need but if they are not expensive I should probably get 4 of each.

Thanks again,
Rick


Rick,

There are very small and thin O Rings on the end of each of those hoses just as the FSM describes. They are not sold with the hoses on the R50. I woudl very strongly recommend replacing them if you have taken the hoses off so. Most leaks on AC lines come from the O-ring seals.
Feel free to call me
866-742-0297
I am here till 5pm CST.

#54 OFFLINE   Alkorahil

Alkorahil

    NPORA Old-Timer

  • Topic Starter
  • Vendors
  • Others: Members
  • PipPipPipPipPip
  • 3,103 posts
  • Local time: 09:59 PM
  • Location:Dallas/Plano, TX
  • Country:
  • Model:XE
  • Year:1995

Posted 09 April 2009 - 11:18 AM

how much for two of the stock adjustable shocks for an 89 in the front? i've asked other places and they wanted like 200 each.



89 SE WD21 Pathfinder
SHOCK, FRONT, ADJUSTABLE
$147.35 EACH
PRODUCTION DATE 7/86 TO 8/89.

#55 OFFLINE   Taoism

Taoism

    NPORA Newbie

  • Members
  • Pip
  • 39 posts
  • Local time: 09:59 PM
  • Model:SE
  • Year:1991

Posted 18 April 2009 - 03:58 AM

Hi there.
I Have a 1991 Pathfinder SE.
I am in search of the lower control arm spindles: (SPINDLE-LOWER ARM, p/n 54419-B9500, or 54419-VK800, or 54419-VK80A, I was told they are all the same) as well as the appropriate nuts and washers.
Also the nuts/bolts/washers that attach the torque arms to the control arms.

82716 is my zip

#56 OFFLINE   Alkorahil

Alkorahil

    NPORA Old-Timer

  • Topic Starter
  • Vendors
  • Others: Members
  • PipPipPipPipPip
  • 3,103 posts
  • Local time: 09:59 PM
  • Location:Dallas/Plano, TX
  • Country:
  • Model:XE
  • Year:1995

Posted 18 April 2009 - 09:39 AM

Hi there.
I Have a 1991 Pathfinder SE.
I am in search of the lower control arm spindles: (SPINDLE-LOWER ARM, p/n 54419-B9500, or 54419-VK800, or 54419-VK80A, I was told they are all the same) as well as the appropriate nuts and washers.
Also the nuts/bolts/washers that attach the torque arms to the control arms.

82716 is my zip



Availability should not be a problem at all on this. I can get you price quotes on Monday.
Please shoot me an email at my work address: rlacy@vtaig.com so I will not forget to do this Monday.
Also, please include your VIN for me!

thanks,
Rob

#57 OFFLINE   Taoism

Taoism

    NPORA Newbie

  • Members
  • Pip
  • 39 posts
  • Local time: 09:59 PM
  • Model:SE
  • Year:1991

Posted 21 April 2009 - 03:05 AM

Sent you an email yesterday morning with the VIN

here it is again, in case the email didn't get to you:

JN8HD17YXMW031305

#58 OFFLINE   GoPathyGo

GoPathyGo

    NPORA Old-Timer

  • Members
  • PipPipPipPipPip
  • 2,361 posts
  • Local time: 11:59 PM
  • Location:Washington, DC
  • Year:2002

Posted 21 April 2009 - 06:07 PM

Hello,
I'm looking for the #74 instrument cluster bulbs for an '03 Pathy. Ideally the type where you can detach the bulb from the base. In my Pathy, that's the brown base fullbeam and turn signal bases. The black bases seem cemented to the bulbs.

I could buy up to 8 of these.
Thanks,
J.

#59 OFFLINE   Alkorahil

Alkorahil

    NPORA Old-Timer

  • Topic Starter
  • Vendors
  • Others: Members
  • PipPipPipPipPip
  • 3,103 posts
  • Local time: 09:59 PM
  • Location:Dallas/Plano, TX
  • Country:
  • Model:XE
  • Year:1995

Posted 23 April 2009 - 05:29 AM

Sent you an email yesterday morning with the VIN

here it is again, in case the email didn't get to you:

JN8HD17YXMW031305

Checked availability and we are good on these.





Part Number: 54419-VK80A

Description: PIN-TRANSV

$17.79



Part Number: 08912-4441A

Description: NUT

$1.60



Part Number: 08915-5441A

Description: WASHER-PLA

$0.72

#60 OFFLINE   Alkorahil

Alkorahil

    NPORA Old-Timer

  • Topic Starter
  • Vendors
  • Others: Members
  • PipPipPipPipPip
  • 3,103 posts
  • Local time: 09:59 PM
  • Location:Dallas/Plano, TX
  • Country:
  • Model:XE
  • Year:1995

Posted 23 April 2009 - 05:37 AM

Hello,
I'm looking for the #74 instrument cluster bulbs for an '03 Pathy. Ideally the type where you can detach the bulb from the base. In my Pathy, that's the brown base fullbeam and turn signal bases. The black bases seem cemented to the bulbs.

I could buy up to 8 of these.
Thanks,
J.

Hold onto your pants....
Nissan List $21.64 each....
Can these for you at $13.64 each.

Its still silly for these little bulbs. Id go to a salvage yard...




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Welcome to NPORA Forums

 

Please REGISTER to gain full access to the forum.

 

Make sure you read the Forum Guidelines and don't forget to post a new intro in the New People Start Here! section, to say hi too everyone.

 

-NPORA