devinwest1984 Posted January 16, 2008 Share Posted January 16, 2008 after about a month of work in the shop over christmas break I finally finished reframing the back half of the pathfinder. the rot started about the center of the rear wheel arch and got worse from there so I dropped the axle and gas tank cut the frame before the rot and rebuilt it. the part that took forever was grinding all the hardware off the old frame rails and cleaning the up so they could be welded to the new frame rails. it is so nice to have my daily driver back and maybe no feel comfortable doing some mild off-roading with it Link to comment Share on other sites More sharing options...
Gotrek Posted January 17, 2008 Share Posted January 17, 2008 Wicked job !! Do ours next Link to comment Share on other sites More sharing options...
nige Posted January 17, 2008 Share Posted January 17, 2008 (edited) looks like you chose some thicker-walled rectangle stock. good call on that did you drill weeping holes so you can spray the inside out? Edited January 17, 2008 by skrillaguerilla Link to comment Share on other sites More sharing options...
devinwest1984 Posted January 22, 2008 Author Share Posted January 22, 2008 looks like you chose some thicker-walled rectangle stock. good call on that did you drill weeping holes so you can spray the inside out? yup I drilled weep holes and used thicker stock. It is so nice to have my car running again. Link to comment Share on other sites More sharing options...
indomwe Posted January 22, 2008 Share Posted January 22, 2008 great job, you have another one to do, U just gotta come over to Ohio to do the job. did you take dimensions etc that you can share with folk?? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now