gabod7 Posted May 18, 2007 Share Posted May 18, 2007 Got a killer deal on some basically new 32 x 10.5's. i know... search search but i have only have limited access to a computer now because mine finally died. will these 32's fit on my stock 88 pathy? Link to comment Share on other sites More sharing options...
Casey.T Posted May 18, 2007 Share Posted May 18, 2007 Your gonna most likely need some type of lift..... or you can do some cutting.... Link to comment Share on other sites More sharing options...
jj big shoe Posted May 19, 2007 Share Posted May 19, 2007 Here's a pic of mine with 32" BFG A/T's, a 2"- 2 1/2"suspension lift and minor trimming. And here's what can happen if you launch the front a couple feet in the air. You can get away with just a suspension lift, but it'll rub a bit offroad. It might work better of you keep the stock 4" offset size rims though. Mine are 3 3/4". Link to comment Share on other sites More sharing options...
rustyole88pathy Posted May 19, 2007 Share Posted May 19, 2007 OUCH! That must have been one hell of a ride! Link to comment Share on other sites More sharing options...
GrimGreg Posted May 23, 2007 Share Posted May 23, 2007 Damn JJ, that's one way to clearance the fenders . Link to comment Share on other sites More sharing options...
Simon Posted May 23, 2007 Share Posted May 23, 2007 I ran 32's with a 3" Suspension lift. They would not fit at stock height. Get some JGC coils, and crank the t-bars to get your lift. Keep it on the ground though, or have your fenders end up like JJ's. Link to comment Share on other sites More sharing options...
NismoSkyZ Posted May 27, 2007 Share Posted May 27, 2007 3+3=33 right? That's 3" bl and 3" sl. You're going to need something...it just won't work stock. Link to comment Share on other sites More sharing options...
cohen Posted June 5, 2007 Share Posted June 5, 2007 same thing happend to mine JJ just not nearly as bad and I didn't have flares on it, a few clamps and pulling them the right way put it back to form...some what. It does work but you have to cut. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now