Search the Community

I have an 03 se, i want to put leds in front and rear turn signals. I put them in rear and got hyperflash, added a load resistor and still got hyperflash. Any ideas? Thanks

When changing out brake lights, have people used white LEDs or red LEDs? What effect did the two have? Since the lenses on the rear lights & the 3rd brake light are all red I was wondering if red LEDs just produce darker red brake lights? Is the brightness of the LED offset by the dimness of a red LED behind a red lens? Consequently, should one go with a white (6000K) LED that will be brighter but tinted red by the lens? Or will this produce a red that is faded to pink by the brightness of the white? I'm looking at these for the rear lights & any number of options for the 198 bulbs in the 3rd Brake Light (there are 9 bulbs there). https://www.ddmtuning.com/Products/1156-6xCree DDM Tuning: HID and LED Lighting I have a problem...Every time DDM comes out with a new reverse light LED I have to get it. It started with the 5W cree which is a great LED but every time they come out with a brighter one I want need it. www.ddmtuning.com

I'm planning on putting switchbacks in the front turning signal and a standard LED turn signal in the rear (as well as LEDs in the normal brake lights & 3rd brake lights). I have a couple questions: Switchbacks: I have tried plug & play without resistors or LED relay in my wife's '09 MDX & they only hyperflashed amber but produced no white at all. Do switchbacks require some additional wiring to produce the white light when the turning signal is not activated? I am planning on using a CF13 LED Flasher Relay but there is a resistor option as well. It seems simpler to just change the relay & avoid heat issues & mounting with a resistor. Another quick question, are there 2 relays (one for the front & one for the rear) and where they are located (I'm at work right now). LED Flasher Relay https://www.diodedynamics.com/led-flasher-for-1996-2004-nissan-pathfinder.html LED Flasher for 1996-2004 Nissan Pathfinder www.diodedynamics.com Switchback LED Turn Signal for Front (will use with relay) https://www.ddmtuning.com/Products/7443-33x5630-Dual-W-A DDM Tuning: HID and LED Lighting DDM Tuning is your one stop shop for all automotive lighting upgrades. We have a huge selection of HID Kits and LED bulbs for all cars, trucks and SUVs. www.ddmtuning.com Switchback LED Turn Signal for Front (if using resistors instead of realy - not my first choice) https://www.ddmtuning.com/Products/7443Canbus-42x2835-Switchback-W-A DDM Tuning: HID and LED Lighting DDM Tuning is your one stop shop for all automotive lighting upgrades. We have a huge selection of HID Kits and LED bulbs for all cars, trucks and SUVs. www.ddmtuning.com Do I have any need for these? If so, where? Extension Wire for Single Filament Switchback LED https://www.ddmtuning.com/Products/extensionwire-for-switchbackLED DDM Tuning: HID and LED Lighting DDM Tuning is your one stop shop for all automotive lighting upgrades. We have a huge selection of HID Kits and LED bulbs for all cars, trucks and SUVs. www.ddmtuning.com Rear Turning Signal LED https://www.ddmtuning.com/Products/1156-6xCree DDM Tuning: HID and LED Lighting I have a problem...Every time DDM comes out with a new reverse light LED I have to get it. It started with the 5W cree which is a great LED but every time they come out with a brighter one I want need it. www.ddmtuning.com