Jump to content

yourfriendjp

Members
  • Posts

    10
  • Joined

  • Last visited

  • Days Won

    1

yourfriendjp last won the day on April 13 2020

yourfriendjp had the most liked content!

Previous Fields

  • Your Pathfinder Info
    2000 XE 4x4 I bought for $850 as an off road project
  • Mechanical Skill Level
    Wrench And Socket Set Mechanic
  • Your Age
    36-40
  • What do you consider yourself?
    I Go When I Can
  • Model
    XE
  • Year
    2000

Profile Information

  • Location
    Tucson, Arizona
  • Country
    United States

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

yourfriendjp's Achievements

NPORA Newbie

NPORA Newbie (1/5)

2

Reputation

  1. Thank you. Any chance you can remind me the break away torque for xterra LSDs 00-04? Sent from my iPhone using Tapatalk
  2. Ok. Well this resolves the issue completely because I have no binding in 4wd. My '00 R50 is AT and the donor was AT. So this would seem to resolve my concern. I was reading elsewhere on NPORA that different trim levels of XTERRA had different rear diff ratios. Thats where I got the 4.9 from. Sent from my iPhone using Tapatalk
  3. Its already installed. Ive had no issues. Lash is tight and crisp. I'm replacing my front diff cushion mounts very soon so I'll lift the rear and count the pinion rotations on one complete tire rotation and report back. What performance difference should I expect if in fact I swapped in a 4.9 when the original was a 4.6? Sent from my iPhone using Tapatalk
  4. Here is a picture of the two diffs side by side: Its hard to tell by the photo, I know. Sent from my iPhone using Tapatalk
  5. Last year I swapped a 2001 Xterra LSD rear diff into my pathfinder and I didn't consider gear ratio until I was scrolling through MPORA and doing some searches and found that some xterra ends were 4.9. So it could be 4.6 and it could be 4.9. How do I know what I have since I didn't log the donor vehicles details before I pulled it and I picked up from a yard so now that donor vehicle is long gone. What are my options? Sent from my iPhone using Tapatalk
  6. are the gears from 00-04 xterra 4.9 gears? I swapped an 01 xterra rear diff in my pathfinder and didnt realize the gearing was this different. I run 31" tires on mine so I'm not too far off from XPLORX4's comment about gear ratio and tire size.
  7. Do you happen to k ow if this fob works? Car Key Fob Keyless Entry Remote fits 1995 1996 1997 1998 1999 Nissan Maxima & Infiniti I30 (A269ZUA078) https://www.amazon.com/dp/B06Y2GW7Z5/ref=cm_sw_r_cp_api_i_-dFMEbRSEAVBB
  8. Darn it! haha that's the one I was hoping would work. Nice to know the cheap one works so I can have something. I'll take the other advice and see what I can find on ebay
  9. Being a Pathfinder nut wasn't part of the plan, but I got this slightly neglected 4x4 finder with 220k for $850. year 2000, XE trim. So far, I've added a front bumper (including wheel wells), corner marker, and step-side slider thingies, re-mounted the front grill and rear bumper so they aren't falling off, repaired two holes in the exhaust pipe, fixed the drivers seat so it actually slides forward and had my mechanic do the timing belt + water pump + etc job because the OG seller can't remember having done it since 130k and it looked like it had never been done before - yeesh. The white door... well, it came like that haha - I guess I'm in the market for a black drivers door for a 2000 pathfinder. Tell your frenz. I'm so new and have questions. I searched the forum a bit but couldn't find an answer to this one: Where can I find a keyless entry fob for this? I see models like NHVBU43 on amazon for a Nissan that look like the fob that would have come with this SUV but it says its for a Maxima. - Is there a known cheap way to find a Nissan fob to use?
×
×
  • Create New...