Sjackson2
Members-
Posts
418 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Everything posted by Sjackson2
-
The only other ones that will work are the aluminum qx4 covers
-
You’ll set off a powervalve ses and lose bottom end torque
-
Rear suspension sag/bottom out solution
Sjackson2 replied to Kazza's topic in 96-2004 R50 Pathfinders
If you’re gonna run the spacers in front why cut the Lr coils down by an inch and a half? 2 inch front spacers and nrc9447 coils is a great combo -
Dude that tube bumper is dope!!
-
You pounded out the old bushings with a rubber mallet? And I’d love a link to the bushings
-
Rack options for custom track with 3 clips on either side
Sjackson2 replied to DanielG's topic in 96-2004 R50 Pathfinders
Pretty sure you can pull the rack off any other r50 and install -
http://www.nissanpathfinders.net/forum/topic/41812-custom-roofrack-build-r50-pathfinder/
-
http://www.nissanpathfinders.net/forum/topic/44771-diy-roof-rack-platform/
-
And yeah this thing has definitely taken me further than I thought a 2wd could
-
Oh a rear locker yes. Just mentioning that I don’t need the front one. I was looking into pulling the heavier duty xterra diff, or even super packing the frontier one like the thread on here
-
2wd
-
A longer coil in the oem strut is fine, but yes the length of the strut can reduce travel some. The OME struts are about an inch longer and will allow some additional travel. But they are the only longer strut option. Everyone else uses oem length struts in the front
-
I got those 9447s you sent me put on and I’m real happy with them. Combined with the longer f250 shocks in the back the ride quality is nice and it definitely performs better over hilly terrain
-
Black 03' QX4 Fun Covid Self Isolation Edition
Sjackson2 replied to PATHYNDH's topic in 96-2004 R50 Pathfinders
How did you “quickly” fix those??? That looks amazing -
You can’t lift more than 2 inches without an sfd unless you don’t mind replacing cv axles
-
Desert rat is a great shop. Mail order or at the brick and mortar
-
Ko2s are great in AZ. You should be able to fit at 31 10.5 on stock rims with a two inch lift. And I’d recommend a coil lift over spacers for sure
-
Get OME springs from desert rat.com. Free shipping
-
I completely agree with you! Desert rat is a great company. I live here in Az and have been into their shop several times and their great guys. Never had a bad experience with them. I’d honestly rather use OME coils from them with a half-1 inch spacer over 4x4
-
Hawairish and TowndawgR50 are teaming up!
Sjackson2 replied to hawairish's topic in 96-2004 R50 Pathfinders
I really wanna know what this non sfd lift option for 2wd vehicles is- 155 replies
-
- sfd
- trailing arms
-
(and 3 more)
Tagged with:
-
Nothin at all wrong with the OME hd coils.
-
You doing anything with those old 9447s?
-
Flyingpathy bought the wrong springs me thinks.
Sjackson2 replied to flyingpathy's topic in 96-2004 R50 Pathfinders
The OME coils inky net around an inch a lot of the time -
I did
-
When I did my lift the only thing I replaced were the strut bearings. My top hats and bellows were in fine condition so I re used them