Jump to content

Dragster

Members
  • Posts

    14
  • Joined

  • Last visited

Posts posted by Dragster

  1. Having problems with the Temp Gauge not working. I have replaced the sender at the coolant outlet, checked continuity (ohms) on the single wire from the sender plug to the instrument cluster (0 ohms), ran wire from the 'B' Lug for Temp gauge to ground, needle moved. But gauge still doesn't work. Also have problem with the Thermal Temp Sensor for the ECM. Checked the 2 wires for continuity (0 ohms), cleaned all connectors. the engine has a slight backfire through the exhaust when decelerating and all trouble-shooting sources indicate the Thermal sender. It's been changed also for a new one. All suggestions welcomed, thanks.

  2. I have a Pathfinder SE that I wanted replace the fog lights with a pair of LED units. problem is they won't work when wired to the current setup? put the old ones back and they work. as many folks know the fogs are wired with the headlight low beams thru the relay. could this be limiting the current to the LEDs. I may just run a seperate line from the factory fog light switch, all suggestions welcomed.

  3. Just brought another 95 SE Patty 4x4 Auto trans. It has no CAT, just a straight pipe to muffler w/ one O2 sensor. What if anything would happen by eliminating that sensor w/ a plug or disconnecting

  4. the back fire is not loud, but I always hear when decelerating. I sounds like it's coming from the engine sometimes, but most times it's from the tail pipe. this morning it starts to 'surge idle' when at a stop. Timing checked, MAP sensor cleaned, Lucas additive in gas tank. No check engine light, but will have that checked anyway. any ideas are good.

  5. have a '95 pathfinder SE, been running great, but today i heard a slight backfire thru the exhaust when lifting off the throttle. i cleaned the MAP sensor, timing checks out good (holds steady timing), but also noticed a drop in gas mileage. all feedback is appreciated.

×
×
  • Create New...