Rusty

I am looking for a good used or new engine wiring harness for my 91 XE V6 5 speed. It is old and coming apart and it has set for a while and squirrels have eaten up some wires although I was able to start it the other day. It has over 350k miles on it. I want to rebuild it for my daughter someday she bought it new and gave it to me a while back. Thanks for any information leading to a new or used harness.

B, it never rains in East Tennessee don't you know, yaw right! I made a top frame out of 1/2" conduit and had a local upholstery shop sew me up a top. I'll do the same for the t-bucket. My daughter wants me to install a pop up on the Pathfinder, she is a pro mountain biker so camps out a lot when she goes to races. That will be a challenge, maybe just take the sky light out and she can crawl up through that? Rusty

Try this again with smaller size pics.

Here are some pics of my 32 Ford Roadster and 23 T-Bucket I am still working on. It needs headers, seat and interior panels and some carpet and it will be done. They both have a sbc 350, which I rebuilt. The 32 has an old 4 speed Saginaw and the t-bucket has a th400 automatic. You can see the rear of the 91 Pathfinder I will be working on starting next month. I'll post pics of the Pathfinders restoration as I go along.

I have been retired for 2 years now and have built two hot rods. A 32 Ford Roadster Hi-boy and a 23 T-Bucket. My daughter bought a 91 Pathfinder in 91 when she was sixteen and three years ago she moved into a motor home and had too many cars so gave it to me. She now wants it restored and wants it back to use in Colorado where she needs the 4X4. It has over 350,000 miles on it and still running. I want to do a body off restoration and do it right. I can handle the engine and tranny rebuild but will need help on the body parts and wiring harness so will be looking for help when I get to that part. She wants it by next winter so this will be a busy summer. I hope to post pics and progress and problems during the project.