Jump to content

Trogdor636

Members
  • Posts

    2,178
  • Joined

  • Last visited

  • Days Won

    26

Posts posted by Trogdor636

  1. Working on a friends Pathfinder, had a rat gnaw on injector 4 wire. Cleaned up wire, put a new connector in, but the vehicle is still throwing the code 51. Injector OHMS out the same as the others. I can hear it clicking with my mechanic stethoscope. Harness has power with a test light, and the wires have continuity. My question is, when the vehicle is running, the OHMS change for the other 5 injectors, however this injector stays at 13-14. Could it still be a faulty injector? Bad wiring? Needs to be smogged soon! Any ideas?

  2. What's up party people? Been forever since I've been here....

     

    I'm installing UCA poly bushings with no good instructions....should the outer lip of the bushing be on the outside of the UCA on both sides? Or should it look as if you used the press in bushings....anybody have a good picture of theirs? Thanks!

  3. so my 94 has a 15 gallon tank?

     

    nevermind it has to be bigger, just checked my mileage records and I have put 17.2 gallons in it before.

     

    I've put in 19-20, so I know mine is bigger. Or that fuel hose holds 5 gallons.......

  4. the only issue was that the person looking at it didn't know what he was looking for, so I had to show him where the labels were.

     

     

    Sounds about right for what's probably a decent paying federal/state job.

     

    I thought I always read that you want undercoating to stay in a filmy/oily like state. You don't want it to dry or then rust gets underneath.

×
×
  • Create New...