97nissan

Looks nice... I was wondering how you mounted the CB microphone holder to your dash. I want to do the same but i cant really drill into the wood grain...

Hey everyone, I'm about to do my timing belt and water pump. So I was wondering what brand you guys could recommend that is good quality???

ahardbody, that is a clean looking brace you made! im definately gonna check mine out and see if i can do some thing similar. Nissaneric, well i havent really seen much of mpg increase if any but it really roars around 2000-3000 rpm and then screams up hill at about 4500 rpms. Im really liking the way it sounds though and seems to not have as much hesitation when shifting anymore. But if you do this, i wouldnt plug that little vac hose with anything cause on mine it seemed to not breathe as good and too the roar away. Hope this helps

x2 what Modifinder said, with the mirror and limo tint on the rear, no body will see $!@# in the back of my truck

Go for it 180sx. Works pretty good, holds it up alot better than it laying down on the wheel well

Yep same MAF sensor, the adaptor fits perfect to it with a gasket it comes with

Yeah its a pretty cool filter for only $18 on ebay. I thought about your idea with the stock air box but did this instead. Made a brace out of a strip of steel. Drilled a hole on each end and bolted one end to a hole above the radiator and the other end on the clamp on that intake tube. looks pretty clean to me and a cheap fix. here it is

Its all good man, yeah they are pricey. Thank god for this Les Scwab credit account i have

Yes im thinkin the same . Thanks, your truck is pretty badass, wish i had more funds for more mods... slowly but surely though

Yep love them toyo A/Ts! I think next time will be the M/Ts, those pretty sick and quite popular around here

Well i havent noticed much roar inside the vehicle but when the hood is up and manually reving it, i can really hear it roar... It does seem deeper with the exhaust when cruising. As for the mpg, i just filled the tank so ill see and reply back on that

Thanks for the replies, unfortunately the check engine light came up today... got the P0443 code, Evap canister purge volume solenoid valve. I plugged that little hose with a screw like DanAK said. Would this code have to do with that little vacuum line?