ImportDoc

I hope not.....going to the junkyard on monday to rip the heads off.

Got a 95 finder, putting pace setter headers and removing the vg30 heads to install 33 heads. What else is requiried? Do i use all my stock manifold stuff or do i use off the vg33? appreciate any help given

that looks like so much fun!!!!

ok so simple question, i have read that to use my stock crank pulley on a 3.3 there is some modification needed to use the pulley and damper on the 3.3. now my question is will there b any clearance issues and accessory issuesif i use the 01 3.3 crank pulley and compressor, alt, and p/s pump. and my main concern is the 01 crank pulley fitting in my 95 pathy.

thanks for the feedback everyone.

so im looking to get a set of headers for the finder...my question is do the same headers for my 95 auto 4x4 fit from my stock 3.0 to the new 3.3 im droppin in? or does mounting come into play? and secondly opinions on what headers to run because i havent heard to many good things about the pacesetter headers.....

31 will fit fin w/o a problem. i have 32x11.5r15's on my finder and no clearence issues here, plus when i bought it, it came with 31's on the lego wheels

thanks for the input. i only ask seeing as if 300z's are 4 piston in front and 2 piston rear. my 95 has rear disc already and i am going to be swappin out rotors and such 2 get a lil better braking but i was just inquiring if any1 knew of this being done. id love to get some more feed back about the master cylinder upgrade...thanks again

i've done some looking around on the site and i just cant seem to come up with anything just yet. Im lookin to see what my fellow finder builders are using for brake upgrades..... any info is much appreciated

Hey all, just a quick run down. im not new to the car world but i am new to the whole trucks and lifting and what not. Well got myself a 95 finder and got ahold on some Mickey's 32x11.5r15 to put on her to start. Question is will these fit the truck at stock height w/o any rubbing or what not? and i also would like to know some more so need your guys help to get my project rolling. i'll post up pics of all the work done so far and goodies already ordered soon