gabod7

ole cj-5 on 44's with the stock d30 and 35 stuck in that picture, haha. he's just now upgraded to d44 f & r and now locked f & r after that little trip. needless to say, he broke his rear driveshaft trying that hole, which is now 39" deep. the leader of our offroad club tried it with his superduty on 37's.. lets just say 2 broken winch cables later and finally a military hummer with a brand new warn 16.5 winch finally got him out after 8 hours. i tried the hole next to it and buried my pathy half way up the doors. sorry so off topic, but heres another pic of the beast, slick.

well, dont move to georgia! it's an everyday thing here

well dang, its only a 2000 dollar fine if you get caught sssh

i have yet to break an engine mount. i used to brake at least 1 (front mount) on my taurus a month. but i havent had that problem yet.

they look a bit unsteady and i guess breakable might be the word to use.

oh, well.. i really don't know anything about calmini because i've never ordered anything from them. alot of the toyotas in havoc are running stuff from MC and they have not seen alot of problems from their items (steering, interior cage, etc) so it seems to be a good way to go if you have a yota p/u. Another note on calmini, theres a guy in havoc also that has a badass little samurai with everything you can think of and he got alot of his stuff from calmini (t-case gears, birfield cups, gears, and the heavy duty front and rear axle shafts) and never once had a problem with their shipping and whatnot. Maybe its just the nissan part.

so that yota setup is like 500 bucks cheaper the xtera sas kit from calmini right? maybe the full pathy set up will be cheaper than that

dang. i just found this thread earlier today and cleaned mine out by hand and with the use of a vaccum cleaner. i couldn't believe the leafs and other random crap i found in there! all cleaned up now

nice set up. most of the dual batterys being run by guys in the offroad club im in have them ghetto fabbed up but they work just fine too.

ignore all the wires and dirt and whatnot. its sittin for 6 months now so im redoin all my wires.how i put it makes it real simple to use and access, just a bitch to instal the brackets into that hard plastic below the radio with limited room to work. oh yeah, i put the 4wheel drive knob on the gear and shifter and vica versa just in case you were wondering why they were like that, lol.

dang. 4000 bucks? i got my 88 for 900 bucks with no rust or anything. just needed a new fuel filter/airfilter, general tuneup. it's served me well through all the stuff i've put it through, basically just dogging it through mud everyday. the only problem i've had with it is the damn alt frying everytime i go through holes over my tires deep. and my dang tick tick exhaust leak and busted cat thanks to a log i drove over.

93 ford taurus.. i did as much as i could do it... lol. 400 bucks in my exhaust, intake, etc etc.. i miss the old car. i totalled it. i wasn't paying attention and slammed on the brakes and went up under the other cars bumper going 65 -thnkboutit-

5 alternators in 3 months... i like deep mud holes

inside busted armrests, the screw fell out of the little triangle window holding it in sunroof handle busted the trimming around the vents are busted none of the indicator lights on the dash work except bright lights and brake light doors dont lock, one window goes down but i have to pull it back up by hand, and the others has a busted motor and a piece of wood holding it in outside no front bumper left headlight sagging due to broke mount several dents everywhere from makin my own paths through the woods and everywhere else ****** factory roof rack thing engine old, 221,000 miles starter is still out, its getting annoying finding a hill everywhere slight oil leak really bad exhaust leak

i orig had my firestik mounted on my bumper. i just drilled into it, put a litte plate and mounted it up. i ran the cable from the firestik down through the bumper and ziptied along the frame til i got to the little guamet (spelling?), went up through there, under carpet, into the cb. it worked great and you never saw a thing. now i have a big ole whip. where the spare tire actually fits on, i welded a small, thin plate of steel at the very back right on the actual carrier and drill pressed a hole. now it all fits together well. i have my spare on, then you cant even see the heavy duty spring. i got black zipties and ziptied the cable to the backside part of the main carrier and routed it through a tail-light. works like a charm and you dont even see the cable, just a little bit of the ziptie.

dang, u need to get a deal like i got. 900 bucks for my 88 with 206,006 on it when i got it. he was asking 1800

My good buddy Will just achieved Eagle Scout and one of his merit badges he had to make a cb radio type of thing and hes starting to get into these because of that project. his dad is real big into ham radios and whatnot so hes tryin to get informed on it. i read that entire webpage and i'm still confused by it all. i really dont know much about them. all i know if is i have a cobra cb, whip that works great, and a loud ass pa speaker. thats about as far as i venture into it, haha. any other good sites y'all know of that can get me out the dark on this hobby?

i unfortunaly did not capture any pictures of it in action with no doors or sunroof. the doors were easy as crap to get off,needle nose pliers and a little hammer. i wrestled with the sunroof for a while, stripping screws left and right until i discovered it will slide right off.. haha. i did have a nice cut across the side of my face for a while where i stuck my head out trying to get down a washed out bank and i turned my head strait and ::bam::. a branch jumped out and popped me..haha it was fun though

haha.. did you see the mall crawler video in the video section that came from Havoc Offroad(the club im in)? hes got a manual 454 runnin off propane under the hood of his blazer. i'll admit, hes also got beadlocks, gears, 39's, axles, lockers, everything you can thimk of... but he always hates on the yota and jeep guys (always joking and in good humor of course) saying his power is what gets him around and to be honest, i believe him. if you see where he goes in that full size rig, the trails he makes by pushin that petal to the metal, you'd believe me to. he goes places in that beast that the toys and heeps cant go and hes double the size. maybe im tryin to defend a lost cause here, but whatever, lol. i've seen toyotas with only 33's and 3 inch body lift do some crazy @!*% at RR and GR, but he steps up and guns it and gets things done. :bow: horsepower

wanna know one real good way to save gas? dont take your doors off and slide your sunroof off and leave the back hatch closed! ...dont ask me how i know sssh

yep, i sure do. i'll try and get a picture of it. he wheeled it every weekend

pshhhh... 3 inch body and 3 inch suspension you can fit 35's with a little trimming.. believe me, i know

:contract: well, effective 2/3/06.. my licenses will be suspended for 6 months. i just got the letter in the mail for tickets i got 6 months ago! i thought you could have 6 points if your under 21 or whatever, and i only got 5..soo.. i guess any "riding" i do is suspended for a while. what really sucks is they will be gone this summer. well yeah, i guess now i'll be able to save, get a new car, and do a ton of stuff to the pathy...haha, guess i gotta look at it on the bright side

i'll agree with the other two.. dont do it. superlift put it there for a reason

new to me, i'll look into doing that.. mine is shot to hell and back