trenton163

same problem here I've been looking for awhile.

I have a 92 pathy with those pods i the back and I know that thoses are 6x9's but what are the front ones in the doors, I think I read somewhere on here that they are 5 1/4 but i want to be sure. Thanks

Okay, thanks for all the info guys! I don't know what I would do without NPORA

So if I tighten my torsion bars and then align my wheels it shouldn't damage my steering components?

I was just wondering if anyone has any experience with them? My front ends sags a lot and when I tried to tighten my torsion bars my front tires looked like "\../". I assume that just getting new ones would be better then risking my steering componets.? Thanks

I just got done with it thanks for all the help.It was way easy and it saved me so much time and money

cool thanks for the info

how much were they?

no I used a two part epoxy that i got at autozone, but thats what I was going to try next.

has the little plugs on anyone's sun roof fallen off? I've tried gluing them on twice now and is still falls off.

same thing happened to me, i got 3/4 of the way up and the engine just died? after i backed down it started right up??

I followed the group of wires coming from my starter. I found where the thick cable separated from the smaller black and purple and the Yellow and Purple wire. Is it the smaller black and purple wire that I need to cut and work with?

okay so i believe that i have the right relay, my only question is what connector are you referring to when you say "It should run from the starter up around/behind the battery where it plugs into another connector." when I follow the starter it appears to be a thick black and yellow cable that runs to the positive battery terminal.? I'm sorry to be a pain in the butt.

okay thanks I read the article, but I'm confused. What is the main harness behind the battery? when I tried to follow my cable all i saw was thick black and yellow cable running to the positive battery terminal. could you maybe post a pic of yours so i could get a better idea of how to go about doing this? It sounds pretty straight forward i just am still a little lost with it.

that's weird, I've never seen one of those before. You could have something special

what company makes a good starter?, I've decided I'm just going to replace it rather than rebuilding it

how would I go about fixing that?

auto

It doesn't do anything,all the lights come on and I turn everything on, it just wont turn over. most of the time I just wait a little bit and it turns over. Once it tries it can turn over easily and it runs smooth.

My pathfinder starts most of the time but there have been some times when it won't.I have replaced the started, the starter solenoid, spark plugs, the battery cables I have an optima battery, but its like three years old. I can't figure it out??? help please?

ya i agree with everyone else $1000 is a little high

he right about the black thing i have one in my pathy

i am actually, could you upload some pictures?

yep the population is around 2000