Leaderboard

The only variation I'm aware of with Lego rims is that the super early ones take mag-style lug nuts with washers, and the rest take the standard acorn lugs. There's a part # cast into the rim that'll tell you which one you have. 4030032G00 are the early mag-style, 4030032G10 are the acorns.

Slapped some poly bushings on my steering rack. Fixed the 1/4 turn of slop when taking a curve but the 1” slop I’ve been trying to pinpoint remains. I think it’s actually somewhere inside the rack itself.

Sent from my SM-N960U using Tapatalk

Fitted up my 33" spare - 255/75r17 to match my 255/85r16 tyres. Also a BFG MT. Only JUST fitted - very tight. Had to let it down to about 4 PSI. Would have gone in more easily if the towbar was just a little further out. I think my bar must differ from US spec ones as some here have fitted 33" spares no worries. In case you're wondering, the factory Nissan towbar is incredibly strong. I broke a Toyota towbar in half at the tongue weld when doing a moderate recovery with an 8 ton snatch strap... and yes, I removed the ball and replaced it with a shackle. Also went on a fun evening trip with the Land Rover club down at the Ashley River. 18 vehicles. I was the only Nissan. Lots of slippery mud and a few nice off camber bits and ruts.

An alpine lake evening!